Printable View
The lake I mainly fish has a very hard. very clean bottom. I currently have a Danforth Anchor that works well in other places, but not where I crappie fish. It is almost impossible to get it to dig it. I know I need some other type and probably something heavy. Boat is an aluminum 14 1/2 footer. Suggestions please.
Hi Glenn;
Found my "chain" for mine, gonna put it on soon, etc......
Danny
Try a richter anchor
Got enough line out for the water depth?Quote:
Originally Posted by Glenn
I fish places with same type of bottom. I forget the name of the anchor, but it looks like a mushroom anchor, except it is split in 2 or 3 places to prevent it from rolling. Works well for me.
I have seen where they make anchors with rebar spikes comming out to grab, i think the body was cement. We use danforth type anchores because we find about one a year. I have added (2) 4lb blocks of lead to our larger anchor for weight. Attention needs to be payed when dropping and anchor so its dropped in the correct direction and set quickly. Our big anchor is a workout to raise. I dont like chains because of the noise. We usually have 2 anchors in the boat becuase i like a real good fixed anchor sometimes while crappie fishing or if im going after cats and using clicker reels
Thanks for the replies. Richter looks good, but expensive. I may play around with some rebar and cement and see what I can come up with. Lake I fish is shallow, averages about 8 feet. Normally let out 25 feet of line. Is this not enough? Thanks again.
Rango introduced me to a Chene anchor. He uses his with no chain, my works better with, same anchor exactly, different lakes. We have a lot of hard clay bottom here. Ive had to make a couple different passes sometimes. Never had it to not grab tho. I spent 30min one night, alone, at 1:30 in the AM trying to get mine out. Eventually had to let every last bit of rop out but the last 10" I tied it off with, and make circles with the motor. Eventually came out though.