To anyone who has used planer boards,
Could I pull Bandit 300's 100-150 ft back with OffShore Tackle Mini Planer Boards. The OR34s. I might also pull berkley flicker shads. Or would I need the OR 12s
Printable View
To anyone who has used planer boards,
Could I pull Bandit 300's 100-150 ft back with OffShore Tackle Mini Planer Boards. The OR34s. I might also pull berkley flicker shads. Or would I need the OR 12s
Not when there are lice on the lake. They like to run over them. Sorry, I have to get it out of my system somewhere before I go home today. DP
You don't need to pull them that far back with boards. 80 ft is about as far as I put them. Boards going to carry them to the outside far enough to not be disturbed by boat. I usually run out about 45-60 ft then attach board then how ever far you want it from boat.
They will work fine behind the OR-34 Mini boards. We pull deep diving cranks with tadpoles with them. As far as the distance behind the board, it is totally dependent on how deep you want the bait to go. The depth is calculated by the length behind the board. The best way to figure out depth is with the Precision Trolling App. They also have individual stickers you can buy. It is the most accurate depth data available. PRECISION TROLLING | thenextbite.tv
What would be the advantage of using the mini compared to using the OR-12 with a tattle-tail flag?
What I like about the Mini is that it's so light on the line. It's easy to tell if theres a small fish on. Another advantage is if you're just getting started with planer boards, you can use any rod with them. They will pull anything you use for crappie. As far as performance, the OR-12's with a Tattle Flag are still the best way to go. They float upright even when standing still and can go a long ways out to the side. The are more expensive but will last a lifetime if you take care of them, there are plenty of walleye tournament fishermen with 15 year old boards. You will need a stiffer rod with a good backbone and a level wind reel. With an 8 rod set up, I like to run 2-OR-12's out each side on the far outside with 2 OR-34 Mini's on the inside, or just one Mini and a dead rod out the back corners.
I like my OR-34 mini boards with bandit 300's and flicker shads for crappie fishing inland lakes because they are easy to handle when fighting a crappie and they store so much easier on my jon boat than the bigger boards.
I much prefer the larger dual boards and using a mast when planerboarding cranks. Much more efficient for me and less surging/bobbing when it gets windy. The micro sized planerboards don't work with cranks for me, I guess I like going too fast and/or my cranks dive too deep.
Here is a pic I found that shoes the Minis pulling #5 Flicker Shads. The boards are a little hard to see to the right of my Dad, but it's the best one I could find. If you're looking to get a long ways from the boat the OR-12's would be better, but I'd be surprised if the Minis wouldn't do the job. We pull the Minis up to 3 mph. They do go a little farther behind the boat, but wide enough to have a good spread and keep from getting tangled.
Attachment 193767