Printable View
I recently bought a garmin 93sv plus with plans to soon get livescope. It's going on an aluminum boat. I fish a lot of stumpy lakes and I also duck hunt out of the boat so the transducer needs to be removable for the winter. What do y'all think would be best to do with my transducer? Pics would be greatly appreciated!
Thanks!!!
I’m redoing a new to me boat now. What I’m going to do is use a 1” thick cutting board from Amazon. Mount and seal it to the transom, then mount ducer to that.
Sent from my iPhone using Tapatalk
I'm thinking that is my best bet. Then I can unscrew it from the board for duck season and reinstall afterward. Thanks for the input!!Quote:
Originally Posted by tcounty
That’s exactly what I would do in that situation as well. I really think that’s your best option. Just use the best glue/adhesive you can find. I know several people that have done this and have had zero issues.Quote:
Originally Posted by tcounty
Sent from my iPhone using Crappie.com
Thanks!Quote:
Originally Posted by DHC
BPS has a plastic or neopreme type block that you can fasten to the transom and mount several transducers to at one time without drilling a bunch of holes in your boat.
Use 3M 5200 marine adhesive and 2 screws to hold the board to the transom. I did it this way and had to pull the transducer board for some work on the transom, ripped the paint right off of the boat trying to get it loose. It does take a long time to really dry well a few days minimum in warm temps.
I did the same, only used marine JB Weld and two screws to mount my board. Screws were sealed with 3M 5200 as well.