Thank You and Sorry, Len I'm jacking your pics as my own Rofl That's just what I needed for an example Thumbs Up
I too use some of those paints, something else for anybody who tries these, I got mine at WalMart. I've found if I use the outdoor ones I get a little better adhesion. I also use drill bits and mine happen to be cupped on the end, if that matters. I'll to do a step by step for a buggier eye. Eyes truly are up to the beholder, some like big eyes, others smaller, then pupils are kinda the same. This is just a basic description and I'll get some pics up later.
For a buggy white eye I use 4 bits:
1) Base coat of the white
2) Extreme glitter but using the next size bigger bit to apply
3) Same as above except the next size smaller bit that the base coat
4) Pupils are preference for size when choosing a bit
5) 2 coats min of Sally's
Myself, I do a run for these eyes of about 200. I'll do each step to all before the next step. The paint isn't dry but it's firm or skinned over allowing the following coat to help build up and out. It also helps combine the strength of the outdoor style paint in adhesion of all. At this point 4 of the stages are complete and I let them cure for 2 days. Finally, I seal them up with Sally's, 2 coats. I know when Sally's get low they start getting thick in the bottle, I'll save them to one bottle and make my 1st coat using them with the bottle applicator and a newer bottle for the final coat. All of this helps to bulge out the eyes like an insect. I cure these for 24hrs. I haven't had good luck with them staying on if I short any of the curing times with acrylic paint. Skip, the extreme glitter makes for a deep bodied, realistic eye that doesn't BLEED when sealing with Sally's Thumbs Up
It's the most labor intensive eyes I'm willing to do. I've been pleasantly surprised with responses and demand and guys seem pretty willing to pay $10/100 just for the eyes :yikes It will give you that molded 3D eye look and stay on a round head. I hope this helps and if you try it, let us know about your result.
Oops, one last thing, I save pop bottle, water bottle lids for applicating. Any lids really, please recycle.