HaHa HaHa:  0
Page 2 of 2 FirstFirst 12
Results 11 to 19 of 19

Thread: 2013 Crestliner Fish Hawk 1750 - $25,500

  1. #11
    Join Date
    Jan 2017
    Location
    Michigan
    Posts
    1,677
    Post Thanks / Like

    Default


    Quote Originally Posted by Hanr3 View Post
    Nice looking rig and very close to what I am looking for in a boat. How long is the boat, motor, and trailer?
    I have a 20' length limit. Crestliner lists the current model at 22'. One of the reasons I ruled them out in my search.
    Hanr3

    I grabbed the 2013 Catalog, and it does not say, It does tell me the length of the boat, but not the boat sitting on the trailer.

    I am going to guess that its over 20 Foot. The boat is 17.5 Foot already, and loads on the trailer with the transom loading over the rear rollers. The motor extends past that length.
    The trailer has a swing tongue, adding an additional foot or two.

    It will be close to 21 or so is my guess, maybe over that a bit, I will get it measured for an exact measurement for you by tomorrow evening.

    OE
    Custom Rods: Out-Snagging Berkly's 7-2 Since 2019 / Custom Rods: Collecting more dust that Berkley due to Covid Since 2020
    Custom Rods: Not afraid to show, in 2021

    Likes dedandy1 LIKED above post
    Thanks Hanr3 thanked you for this post

  2. #12
    Join Date
    Jan 2017
    Location
    Michigan
    Posts
    1,677
    Post Thanks / Like

    Default

    Hanr3

    I got it measured. With the motor down, from the back of the motor to the tip of the trailer tongue, was roughly 22 Foot, 8 inches.

    From the Transom to the trailer tip was roughly 20 foot 8 inches, I had no one to help so the tape was laid out on the floor. Its as close as I could measure.

    I'm guessing its over your 20 Foot requirement.

    OE
    Custom Rods: Out-Snagging Berkly's 7-2 Since 2019 / Custom Rods: Collecting more dust that Berkley due to Covid Since 2020
    Custom Rods: Not afraid to show, in 2021


  3. #13
    Join Date
    Nov 2008
    Location
    East Peoria IL.
    Posts
    4,898
    Post Thanks / Like

    Default

    Quote Originally Posted by OneidaEagle View Post
    Hanr3

    I got it measured. With the motor down, from the back of the motor to the tip of the trailer tongue, was roughly 22 Foot, 8 inches.

    From the Transom to the trailer tip was roughly 20 foot 8 inches, I had no one to help so the tape was laid out on the floor. Its as close as I could measure.

    I'm guessing its over your 20 Foot requirement.

    OE
    Yea, unfortunately. I have had several CDC members give me the low down on your boat, all good reviews. Sounds like it will be an awesome boat for some lucky guy/gal. I could manage 21' by pushing it sideways once inside the garage, but I doubt I could squeeze another 18", total of 22' in a 20' space. Too bad too, I really like the layout on the Fish Hawk series.
    HOI Crappie Club
    Where family and friends come to compete for a little more than bragging rights.

    Quick, someone teach me how to fish so I can win this tournament!!!

  4. #14
    "D"'s Avatar
    "D" is offline Super Moderator and 2023 Crappie.Com Man of the Year * Crappie.com Supporter * Member Sponsor
    Join Date
    Jul 2012
    Location
    Iowa, Louisiana
    Posts
    12,258
    Post Thanks / Like

    Default

    They make a tongue folding device. You install it in front of the winch support by drilling holes and bolting it on. Then you cut the tongue and install the other side to it. Pins and swivels. Can knock off a couple feet in length for storing boat. I did one once for that reason.Fulton Fold-Away 3" x 3" 5,000 lbs. Trailer Bolt-On Hinge Kit Zinc Finish- HDPB330301
    Team Overalls Travel Squad

    FISH for LIFE

    HUMANKIND......be both

  5. #15
    Barnacle Bill's Avatar
    Barnacle Bill is offline Super Mod and 2014 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Chesapeake, Va
    Posts
    20,366
    Post Thanks / Like

    Default

    Quote Originally Posted by D";3961508]They make a tongue folding device. You install it in front of the winch support by drilling holes and bolting it on. Then you cut the tongue and install the other side to it. Pins and swivels. Can knock off a couple feet in length for storing boat. I did one once for that reason.[URL="http://www.towuniverse.com/fulton-fold-away-3-x-3-5000-lbs-trailer-bolt-on-hinge-kit-zinc-finish-hdpb330301?language=en&currency=USD&msclkid=7f6ef1 4f338e1711f530af1b84710f6f
    Fulton Fold-Away 3" x 3" 5,000 lbs. Trailer Bolt-On Hinge Kit Zinc Finish- HDPB330301[/URL]
    According to his first post it already has one. Swing tongue?? Or is that something different?
    Fair Winds and Following Seas

    Bill H. PTC USN Ret
    Chesapeake, Va


  6. #16
    Join Date
    Jan 2017
    Location
    Michigan
    Posts
    1,677
    Post Thanks / Like

    Default

    Quote Originally Posted by Hanr3 View Post
    Yea, unfortunately. I have had several CDC members give me the low down on your boat, all good reviews. Sounds like it will be an awesome boat for some lucky guy/gal. I could manage 21' by pushing it sideways once inside the garage, but I doubt I could squeeze another 18", total of 22' in a 20' space. Too bad too, I really like the layout on the Fish Hawk series.
    Hanr3

    I thought you were needing measurements for a triple haul, behind a 5th wheel, so measured to the tip of the tongue, fully extended. It does indeed have a swing tongue, to shorten the total length, but did not think to measure that distance. I will go measure that length for you as well.

    Side note, when storing the boat, I also stored mine sideways, but I placed it on car dolly's. Then jack the front to distribute the weight, and rotate sideways, for the winter in the garage. Those dolly's make it easy peasy.

    OE
    Custom Rods: Out-Snagging Berkly's 7-2 Since 2019 / Custom Rods: Collecting more dust that Berkley due to Covid Since 2020
    Custom Rods: Not afraid to show, in 2021


  7. #17
    "D"'s Avatar
    "D" is offline Super Moderator and 2023 Crappie.Com Man of the Year * Crappie.com Supporter * Member Sponsor
    Join Date
    Jul 2012
    Location
    Iowa, Louisiana
    Posts
    12,258
    Post Thanks / Like

    Default

    Quote Originally Posted by Barnacle Bill View Post
    According to his first post it already has one. Swing tongue?? Or is that something different?
    Thanks Bill, I missed that. However, looks like we gonna get a new measurement.
    Team Overalls Travel Squad

    FISH for LIFE

    HUMANKIND......be both

  8. #18
    Join Date
    Nov 2008
    Location
    East Peoria IL.
    Posts
    4,898
    Post Thanks / Like

    Default

    Quote Originally Posted by OneidaEagle View Post
    Hanr3

    I thought you were needing measurements for a triple haul, behind a 5th wheel, so measured to the tip of the tongue, fully extended. It does indeed have a swing tongue, to shorten the total length, but did not think to measure that distance. I will go measure that length for you as well.

    Side note, when storing the boat, I also stored mine sideways, but I placed it on car dolly's. Then jack the front to distribute the weight, and rotate sideways, for the winter in the garage. Those dolly's make it easy peasy.

    OE
    I saw the dolly's and debated them in my garage too.
    good to know this was tongue extended. I too assumed the measurement was with the tongue swung. Appreciate you measuring with it extended. I like a longer tongue for launching and retrieving, keeps my feet out of the water. Also appreciate you considering my triple towing length. I added the swing tongue to my current boat trailer. I had to whack off 30" and bet yours will be close to that measurement.
    HOI Crappie Club
    Where family and friends come to compete for a little more than bragging rights.

    Quick, someone teach me how to fish so I can win this tournament!!!

  9. #19
    Join Date
    Jan 2017
    Location
    Michigan
    Posts
    1,677
    Post Thanks / Like

    Default

    SOLD

    Please move to the archives.

    Thanks

    OE


    Sent from my iPhone using Crappie.com Fishing mobile app
    Custom Rods: Out-Snagging Berkly's 7-2 Since 2019 / Custom Rods: Collecting more dust that Berkley due to Covid Since 2020
    Custom Rods: Not afraid to show, in 2021


Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP