Small Jig Heads

**fished-out** · 02-28-2019, 10:22 AM

Thanks, chaunc, I've ordered some jigs from TJ. However, he only goes down to 1/64. However, I've found the 1/80 before. Here's a photo of 3 jigs with barbs that I have, all on a number 6 hook, from left to right--1/80, 1/64, and 1/32. The latter was added for comparison. They're out there, just have to find them. Notice how thin the lead is on the 1/80 hook shank, and how small the barb is, but it's there. I just need to find them again.

Name: IMG_20190228_100053.jpg
Views: 425
Size: 124.0 KB

Name: IMG_20190228_100053.jpg
Views: 425
Size: 124.0 KB

**Rockhitter** · 02-28-2019, 11:53 AM

"Killer Jigs", i believe he has them down to 1/100 oz.

**fished-out** · 02-28-2019, 01:03 PM

Thanks, I'll check them out.

**crappielimits** · 02-28-2019, 02:14 PM

If you could get a jewelry scale and weigh those, I think a 1/48 from Litewire will probably be pretty close. That's if a extra fine wire hook will work for your application. Maybe pour the 1/64 and trim a little off with a dremel?

**fished-out** · 02-28-2019, 03:45 PM

Thanks. I've got some 1/64's on order, so the dremel idea is a good one if I can't find them somewhere. I looked at Killer Jig and they don't go down to 1/80 on the web site, but I didn't call them yet.

**chaunc** · 03-03-2019, 09:37 AM

Originally Posted by fished-out

Thanks. I've got some 1/64's on order, so the dremel idea is a good one if I can't find them somewhere. I looked at Killer Jig and they don't go down to 1/80 on the web site, but I didn't call them yet.

Years ago I got some 1/80. Kiptail jigs from a member here from Minnesota. Keith Nelson, crappie Keith was his screen name. Maybe he could direct you to where you could find some 1/100 heads too. I’m not sure if he’s still on the site but it won’t hurt to try to find him.

**fished-out** · 03-04-2019, 10:22 PM

Thanks chaunc

Thread: Small Jig Heads

Thread Tools

Display

Tags for this Thread

Posting Permissions