Have you poured weedless jig heads before? I have never poured any but while looking for a mold several months ago, I read that the fibers shrivel from the heat. It is better to drill the heads and epoxy the fibers in.
Anyone have any weedless jig head molds they might want to part with? I’m primarily looking for ones that are barbless, but am willing to take a look at what you might have.
Please send PM
Thanks!
Sent from my iPhone using Crappie.com Fishing mobile app
Have you poured weedless jig heads before? I have never poured any but while looking for a mold several months ago, I read that the fibers shrivel from the heat. It is better to drill the heads and epoxy the fibers in.
I just modified my Do-It mold with a dremel tool and diamond burr bit to accept a piece of stainless leader single strand wire. Pour 1/32 to 1/4 oz. Is slow placing the short pieces of wire in grooves but works. Tried braided wire but it frazzled.
Sent from my SCH-I545 using Crappie.com Fishing mobile app
Early to bed, early to rise,
Fish like hell, make up lies.