Thread: Homemade Inlines

Pretty spinners, bet you can't wait to see if the fish want to kill them

Sent from my SM-A505U using Tapatalk

A side note to those who enjoy making their own inlines, I saw on some of the JDM inline spinners that they use a wire form with a built in swivel tie end. I searched for several months and finally found some. I used to attach a small micro swivel to my lure (still do on the .026 wire lures) but these have them as part of the wire form. They are available in .031", .035" and .039". These are a bit sturdier than the .026" as they don't deform as much. I also ordered some 50/50, Gold/Nickel french spinner blades. I attach a #00 split ring to attach a JDM fine wire single hook as well. The split ring allows you to change out hooks, i.e., different sizes, colors, trebles, dressed, etc. Also single hooks don't snag as much as trebles. When they do snag, due to the fine wire you can sometimes bend the hook to free the lure and with the split ring you can replace the hook. The single hook also allows you tip it with a piece of nightcrawler, mealworm or trout nibble to make it more enticing if desired. Also, if you release the fish there is less chance of damaging the fish with the single hook compared to a treble hook.

I was thinking of getting the do it mold and pouring some inline spinners. What size wire, blades would you recommend. Thanks


Sent from my iPhone using Crappie.com Fishing mobile app

Nice looking spinners....made right. I gave up on spinners years ago due to none having the swivel and hated treble hooks. Then a little over a year ago bought some Smith Niakis 3 gram spinners....with the single hook.

Regards


Sent from my iPad using Crappie.com

A few that I made a while back. The quick snap lets me use any trailer I like. I don't use a swivel at the tie end. I use braid when fishing them and never have had a line twist issue. This has been my go to white bass summer lure for many years. My opinion and two cents worth!

Sent from my SM-G960U using Crappie.com Fishing mobile app

z520tom:

I like the use of the Quik Snap for attaching the flies.

Mike1234;

I use various solid brass beads in different finishes as well as various brass lure bodies. I use Sonic Blades to make the PM style spinners but I mostly prefer the French Spinner Blades as ‘I’ find they spin more easily than other types. It depends on what weight of spinners you are making that will determine what size wire and blades you need to use. Here are some “recipes” that I use. Different wire sizes will change the weight of the spinners. They don’t have to be exact but should be pretty darn close to the desired weights. In my experience commercial lures do not match listed weights exactly but are close enough. When using light line such as JDM nylon lines you need to use appropriate size lures for given line weights or you will lose some lures and/or break your line when casting. Ask me how I know.




Sent from my iPhone using Crappie.com Fishing mobile app[/QUOTE]

Since you are using monofilament ( nylon ) I understand your using the swivel at the line attachment end.

Sent from my SM-G960U using Crappie.com Fishing mobile app