Thread: Trolling motor mounting question

I always mount my Terrova, Rip Tide , or Ulterra on the starboard side and have the shaft across the bow so when they motor is deployed, it is on the port side as close to the center-line as possible. I run 60 inch shaft motors so this set-up lets me keep the head and foot as protected as possible.

Originally Posted by M R Dux

I always mount my Terrova, Rip Tide , or Ulterra on the starboard side and have the shaft across the bow so when they motor is deployed, it is on the port side as close to the center-line as possible. I run 60 inch shaft motors so this set-up lets me keep the head and foot as protected as possible.

That’s how mine is currently but I have to turn my t-bars to clear motor when stowing or deploying. I’m running a hand controlled bow mount currently and it not as bad as the cable steer foot controlled motor was. Wrestling the motor, t-bars and cable was a hassle by myself.


Sent from my iPhone using Tapatalk

I have mine mounted straight with the boat and 12 inches off center....it tracks great....can stow and deploy without rod holders being in the way.

Here is how I have mine mounted on 17ft wareagle stick steer. Which is very similar to how G’s is mounted. I have never had a minutes trouble with tracking and I have run G’s and his tracks fine.