Thanks: 
HaHa: 
Reply With QuoteUse pin stripping. You can get it from auto parts store.
Sent from my iPhone using Crappie.com Fishing mobile app
Slabmaster II
Marking depth on Trolling Poles
What is everyone using to mark there trolling poles to help set depth. I have tried tape but seems to come loose easily. Any suggestion?
Keeper
Use pin stripping. You can get it from auto parts store.
Sent from my iPhone using Crappie.com Fishing mobile app
gaint_71 LIKED above post
Slabmaster II
How wide does the pin stripping comeOriginally Posted by SMOKEWOLF67
Sent from my SM-N950U using Crappie.com Fishing mobile app
Keeper
1/4”. I use the reflective color pinstripe. You can see it easily. You can also put 2 stripes next to each other. If you want something wider, you can use masking tape and paint.
Sent from my iPhone using Crappie.com Fishing mobile app
Super Moderator and 2023 Crappie.Com Man of the Year
* Crappie.com Supporter * Member Sponsor
Liquid white out?
Team Overalls Travel Squad
FISH for LIFE
HUMANKIND......be both
Crappie.com 1K Star General
I use pinstripe tape then put a coat or two of clear vinyl lure and jig finish over the top of the tape.Works just fine.
Sent from my SAMSUNG-SM-G891A using Crappie.com Fishing mobile app
Crappie.com 2K Star General
I've had painters tape on my rods for over a year now. I made sure the seam was at the top of the rod so the line didn't catch.
What time is it?IT'S CRAPPIE TIME!
Trophy King
A little hint. If you decide to use red enamel model car paint like I did, don’t do it on the kitchen table next to the sweater your wife has been crocheting for several weeks.
Sent from my iPad using Crappie.com Fishing mobile app
Crappie.com 1K Star General
Very good advise!!
Sent from my iPad using Crappie.com
Crappie.com Legend and Mississippi Moderator
I use one wrap of painters tape . 14 ft. poles .Only mark 1/2 of pole guess off of that .
