Uncle Don's coffeehouse 2018

**OneidaEagle** · 01-24-2018, 09:28 AM

Now where does that transducer mounting board go?

Name: LundLeak.jpg
Views: 150
Size: 19.3 KB

**Just Steve** · 01-24-2018, 10:55 AM

Done

Name: IMG_7745.jpg
Views: 109
Size: 41.1 KB

I am pretty sure it won’t leak, I squeezed 5200 into the holes the SS screws go into. Also went around perimeter of board before attaching and then around exterior after it was attached.

So, cargo netting installed, transducer mount on and Trolling motor back on after rebuilding it by a friend......now to finish the sound system.

Sent from my iPhone using Crappie.com Fishing mobile app

**OneidaEagle** · 01-24-2018, 10:57 AM

Looks good........

**"D"** · 01-24-2018, 11:17 AM

I brought a new boat home once. Noticed the battery boxes were not fastened down. Decided to screw them down as I thought they were on a bracket. Drilled first hole and noticed light. Yes, drilled right through boat. Brilliant!! Put a stainless screw with sealer in from the bottom. That was over 20 years ago. A friend bought the boat shortly after(divorce, another story) and that screw is still in it.

**wicklundrh** · 01-24-2018, 12:29 PM

No more room for the rest of your transducers???

That is a wee little guy!

**spartannation** · 01-24-2018, 01:51 PM

Originally Posted by steelguy

T-bone for 2.99?
must be from one of those old Ionia milk cows

They're surprisingly good. I'm not a steak snob and probably don't know a good one from a bad one but these things taste good to me. Just finished cooking up a pan of smoked neck bones, they were real good, too. Stores in a not so good part on town but I haven't ever had any issues with the locals.

**Just Steve** · 01-24-2018, 02:00 PM

Originally Posted by wicklundrh

No more room for the rest of your transducers???

That is a wee little guy!

I only have one transducer, I don’t have SI......wouldn’t know how to read it if I did.

Wee little guy????
The things I could say.....

Don’t Judge.....

Transducer envy?

I better keep the other half in case some day I’m smart enough to need better electronics

Anyhow, until then this one will do.

Name: IMG_7747.jpg
Views: 139
Size: 55.8 KB

Name: IMG_7747.jpg
Views: 139
Size: 55.8 KB

Sent from my iPhone using Crappie.com Fishing mobile app

**skillett007** · 01-24-2018, 02:36 PM

Originally Posted by wicklundrh

No more room for the rest of your transducers???

That is a wee little guy!

That's what I was thinking, sounds like 2 more holes to get another board on there

Sent from my iPhone using Crappie.com Fishing mobile app

**OneidaEagle** · 01-24-2018, 02:54 PM

Hey,

It takes a guy like Steve to be able to use a small mounting board and pull it off with style.

Steve, they only call it WEE, because they are insecure about the size of their Transducer...........

**spartannation** · 01-25-2018, 04:34 AM

Looks good, Steve.

I got the carpet installed in my boat yesterday,it's mostly back together now. I added some led lights and utilized the old live well switch to run them, I put a timer switch on the live well years ago. When I removed the switch mounting plate from the dash I found a loose wire that went to the bilge pump and fixed that. Glad it didn't fail last fall when we almost sunk the boat. I think I need to replace the switch for the nav lights, I tested the lights before I reinstalled them and they worked but don't work through the switch. Can I get the old style rocker switch at an auto supply or will I have to find one on line? Today I'm installing the seat bases and getting the batteries back in the boat and hooked up.

Now it's time to make a pot of coffee.

Thread: Uncle Don's coffeehouse 2018

Thread Tools

Display

Tags for this Thread

Posting Permissions