Thanks: 
Reply With QuoteI just remove the hitch now and save myself the trouble!
Sent from my SM-J320V using Crappie.com Fishing mobile app
HaHa: 0
Crappie.com 3K Star General - MI Moderator
That's a goodun Steve, but I think you'll need some pipe insulation, say 2 or 3", to fit. JMHO.
Sent from my SM-G900V using Crappie.com Fishing mobile app
Life has many choices, eternity has two...choose wisely.
Unapplied biblical truth is like unapplied paint...how many gallons do you have sittin' around? U.D.Redge LIKED above post
Crappie.com Legend
I just remove the hitch now and save myself the trouble!
Sent from my SM-J320V using Crappie.com Fishing mobile app
I have OCD "Obsessive Crappie Disorder"
Crappie.com 2K Star General - Moderator
.......and theres that.......Originally Posted by wicklundrh
Honestly, I'm not going to wrap my hitch with a pool noodle......nor am I going to remove it......I'll keep doing what I've always done, smack the *$#@(*& thing with my shin and continue to say bad words.....
2017 MiCDC fall crappie guide of the year (FCGOTY)
Member: “Michigan chapter of Team Overalls”
Haulin Ash Fishing Rocks-"D"
Caution: If we fish together, you may be on YouTube
Crappie.com 1K Star General
I just pretend I hit my shin, and say the bad words for fun........
Sent from my iPhone using Crappie.com
Custom Rods: Out-Snagging Berkly's 7-2 Since 2019 / Custom Rods: Collecting more dust that Berkley due to Covid Since 2020
Custom Rods: Not afraid to show, in 2021
Crappie.com Legend
Your Polish, I thought you ran into it just for fun!!!
I have OCD "Obsessive Crappie Disorder"
Crappie.com 3K Star General
Shins scarred up from banging them on the hitch. If you start cussing it before you get to the truck? It will help remind you to be careful. Now, if I could quit hitting my head on the 5th. wheel.
Crappie.com 2K Star General - Moderator
Tired of a wind tunnel?
I “borrowed” this idea from Dale.....maybe he got it from Rich....
I wanted thicker plexiglass but I went with what the local hardware store had.
Bent it where it needed to be using a heat gun, then added a stiffener to the backside. Used paper binder clips, small bungee strap and one of those wire shelf supports on each side to fasten it.
Put a large decal to hide stiffener and warp spot from using too much heat.
Add extra sticker cause you support product (I.e. pro staff)
And there you have it..... redneck wind tunnel blocker.
Sent from my iPhone using Crappie.com Fishing mobile app
2017 MiCDC fall crappie guide of the year (FCGOTY)
Member: “Michigan chapter of Team Overalls”
Haulin Ash Fishing Rocks-"D"
Caution: If we fish together, you may be on YouTube
Crappie.com 2K Star General - Moderator
Prototype broke first trip out, rebuilt it using 1/4” Plexiglass and no wood backer
Sent from my iPhone using Crappie.com
2017 MiCDC fall crappie guide of the year (FCGOTY)
Member: “Michigan chapter of Team Overalls”
Haulin Ash Fishing Rocks-"D"
Caution: If we fish together, you may be on YouTube
Crappie.com Legend
I figured you might have an issue with the thinner glass.
Dad's original idea was canvas like we used to have years ago. Brainstorming ended up with the plexiglass idea. Of course, everytime I would run up or down the river in the spring, he would always talk about how nice it would be to have one. Then he makes one for himself!!!
Funny thing, I just throw one of my fishing bags in the space and it blocks the hole off perfectly. People would be amazed at how much air comes through there.
I have OCD "Obsessive Crappie Disorder"
Crappie.com 2K Star General
Few times I used my Ram trooling motor stabilizer I'm finding it to be a pain always un screwing the clamp and removing the arm or tightening the arm back down so I picked up a simple rubber clamp and mounted it to a old fish finder ram plate that I cut to size
