HaHa HaHa:  0
Results 1 to 6 of 6

Thread: Minn Kota 40lb clamp screw washer replacement

  1. #1
    Join Date
    Apr 2023
    Location
    Hartville
    Posts
    59
    Post Thanks / Like

    Default Minn Kota 40lb clamp screw washer replacement


    Has anyone every replaced one of the cone shaped clamp screw washers. Lost one, got a couple of replacements for 99 cents, but the hole in the washer is smaller than the post it needs to slide onto. Do I drill the hole bigger, feed onto post, then somehow make the end of the post larger so the washer doesn't fall off?

  2. #2
    Join Date
    May 2011
    Location
    MIssouri
    Posts
    398
    Post Thanks / Like

    Default

    watching

  3. #3
    Join Date
    Dec 2013
    Location
    Tignall, GA
    Posts
    1,412
    Post Thanks / Like

    Default Cup goes on and the retainer holds it



    Cup goes on and the retainer holds it from falling off when loose. Sounds like you need the correct cup/washer and retaining clip. If you are determined to use the washer you have, drill it a little and use a small spring clip.

    Thanks grizwilson thanked you for this post

  4. #4
    Join Date
    Apr 2023
    Location
    Hartville
    Posts
    59
    Post Thanks / Like

    Default

    Thanks NCKenner, I'll see if Minn Kota can get me the correct sized washer and clip.

  5. #5
    Join Date
    Dec 2013
    Location
    Tignall, GA
    Posts
    1,412
    Post Thanks / Like

    Default

    You'll need P/N 2011710 and P/N 2333000.
    Minn Kota Transom Mount Clamp Washer (2-Pack) - Trollingmotorparts.com

    Chris
    Likes BuckeyeCrappie LIKED above post

  6. #6
    Join Date
    Apr 2023
    Location
    Hartville
    Posts
    59
    Post Thanks / Like

    Default

    Thanks Chris! parts ordered.
    Likes NCkenner LIKED above post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP