HaHa HaHa:  0
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: Motor Turning While Trailering

  1. #21
    Join Date
    Jan 2018
    Location
    Lincolnton, NC
    Posts
    96
    Post Thanks / Like

    Default


    Some of the questions you are asking I can't answer. The Motor Toter is one that came from Bass Pro. It connects to the trailer with a clip pin and then to the motor with the black bungee. The boat is a stick steer boat. It is not a hydraulic steer system. The boat is in the shop getting a new steering cable. I don't know if that has anything to do with the problem I am on here addressing. My first boat was a14' Fisher Marine Stick Steer with a 40 HP, and I just can't remember having this issue with it. I have only had this boat in my possession for one half of a day and night. I am an experienced boater for over 50 years. NC Kenner from what I can remember the short time I was with the boat it does look like the picture you have.

  2. #22
    CrappiePappy's Avatar
    CrappiePappy is offline Super Moderator - 2013 Man Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Lexington, KY
    Posts
    23,865
    Post Thanks / Like

    Default

    Sorry for any confusion, Sandy .... here's what I'm calling a "motor totor" ... Site Maintenance ... and it's what I use on my boat (to hold a 90HP Merc steady when trailering). That's why I asked if you had tilt/trim.

    Also, Attwood does make a similar item that's half the cost of the BPS "transom saver". ( Amazon.com )

  3. #23
    Join Date
    Jan 2018
    Location
    Lincolnton, NC
    Posts
    96
    Post Thanks / Like

    Default

    Crappy Pappy, Thanks for the reply. I have used the one you show on the numerous bass boats I have owned and have had no problem with motors ranging from 150 to 225. The one I currently have has a v shaped rubber piece at the top with the black rubber bungee and at the bottom it attaches to the trailer with a clip pin. After looking on Amazon I see that Attwood has an adjustable one like it. When I get the boat back from the shop, parts are on order from Tracker, I will address this problem with gusto !!
    Likes CrappiePappy LIKED above post

  4. #24
    Join Date
    Jan 2018
    Location
    Lincolnton, NC
    Posts
    96
    Post Thanks / Like

    Default

    I want to thank all of you that have responded. It has been quite a spell since I have been on here. I have been battling some health issues that I won't bore you with the details. Before this boat I owned a 218 DLV Carolina Skiff and sold it approx. 2 years ago. I had pretty much thought my boat owning days were over because one problem I have is I am a little unsteady on my feet. But I got to remembering and thinking back to my first boat, the 14' Fisher Stick Steer, and the idea hit me that if I had another boat like that I would not have to be up and about as much and I could run the boat and fish from one position most of the time. So I began the quest of finding a Panfish 16 Stick Steer. So here we are. But as you know, owning a boat comes with it's challenges. So I want to thank all of you for being so helpful.
    Likes NCkenner, Jamesdean LIKED above post
    Thanks CrappiePappy, wannabe fisherman thanked you for this post

  5. #25
    Join Date
    Dec 2017
    Location
    N.W.Springfield,Missouri
    Posts
    9,932
    Post Thanks / Like

    Default

    Could be that rubber piece for attaching to the trailer is worn. I have the attwood style, solid metal and no tilt problem
    Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
    1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph

  6. #26
    Join Date
    May 2023
    Location
    Madison, MS
    Posts
    373
    Post Thanks / Like

    Default

    Quote Originally Posted by Jamesdean View Post
    Could be that rubber piece for attaching to the trailer is worn. I have the attwood style, solid metal and no tilt problem
    My dad had a Tracker Panfish 16 back in the late 90’s and early 2000s. If I remember correctly, the stock motor toter was bad.


    Sent from my iPad using Tapatalk
    Last edited by "D"; 09-09-2024 at 09:19 AM.
    If I'm not at work or taking kids to their activities, you might find me on "The Rez"

  7. #27
    Join Date
    Jan 2018
    Location
    Lincolnton, NC
    Posts
    96
    Post Thanks / Like

    Default

    Have thought the same thing about the toter being the problem. I am just going to wait till I get the boat out of the shop and then start dealing with it. Not much I can do till I can get my hands on it. I appreciate all of you and will keep you informed of my progress.
    Likes wannabe fisherman LIKED above post

  8. #28
    Join Date
    Oct 2023
    Location
    North Alabama
    Posts
    316
    Post Thanks / Like

    Default

    If you put the motor on a totor and pinch down just a tad with the hydraulic. It will not go anywhere. If it doesn't have hydraulic swing it to one side and strap it there.

    Sent from my SM-N970U using Crappie.com Fishing mobile app

  9. #29
    Join Date
    Jan 2018
    Location
    Lincolnton, NC
    Posts
    96
    Post Thanks / Like

    Default

    Update: Got the boat back and the new steering worked a lot better, however, it is also quite a bit stiff when trying to turn left. The motor still swings to one side, so I installed a couple of pad eyes and hooked a bungee cord around the stick and it stays straight. On a side note. I had my first encounter with a wake boat last week. An experience to say the least.

  10. #30
    Join Date
    Oct 2023
    Location
    North Alabama
    Posts
    316
    Post Thanks / Like

    Default

    Which steering system are you using

    Sent from my SM-N970U using Crappie.com Fishing mobile app

Page 3 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP