Thread: Swing couplers .....

here is a pic of what I am looking for ......

They should have everything you need.

Attention Required! | Cloudflare

This is the one I bought off Amazon. It was just under a hundred bucks when I bought mine. Beautifully galvanized inside and out, casted and made in the good old USA by Fulton. Came with the center punch to start your drill bit, and the torx fastener for the included torx bolts for the install. Be sure of the size you need, mine was 3"X3". I used a recip saw to cut, then sanded and rustolium painted (Black) inside and out the exposed trailer from the cut. My goal was to shorten overall trailer length for more options in the garage. I also shortened the trailer neck some to allow it to swing away from the winch, yet allow enough room for the trailer step I installed for getting up in the boat on the other side from the winch.
Amazon.com

ETrailer.com


Sent from my iPhone using Tapatalk

Don’t know why my link above states that but is a link to it at etailer.

No just go to etrailer.com. They have them and anything else you need for a trailer. I’m trying to ween myself off of Amazon.


Sent from my iPhone using Tapatalk

Thanks for al the responses, but my trailer has a A shape toward the tongue and most of these will not make the trailer shorter. Here is my trailer tongue

I need to swing the trailer close to the trailer jack area, so the 3 trailer tubes would have to go into a adapter like i posted originally. Or some welding and support brackets used?