A spark plug with a very dirty boot. The boot just pulls off so you can get to it.
Disconnecting my wires and cables to remove the motor from boat. And I have this one wire that attaches to the back of the out board between the 3rd and forth spark. I assume it's a temp sensor but I'm not sure which portion to disconnect. I removed the front screw but it didnt help.
Any advice would be appreciated
Sent from my SM-J737T using Crappie.com Fishing mobile app
Love, what more can I say
A spark plug with a very dirty boot. The boot just pulls off so you can get to it.
Ok, did you try taking #2 loose inner nut or outer nut. From what I can see I’d try taking the bolt #1 out. Sorry for bad drawing.
Maybe water pressure or temp
If the fitting is seized, you can cut the tubing and reconnect it later with a coupler fitting
I'd rather be fishing.mighty LIKED above post
why dont you check with the manufacturer, you will get positive answer, seems like a few are just guessing .