If under, I just move my king pin seat on axle. To the top.
Baitwaster your rite. Didn't ask if underslung.
If under, I just move my king pin seat on axle. To the top.
They make airbags for just this reason might be something to consider.
One of those axle flip kits is cheaper than leaf springs. I’ll see if I can find a kit that will work for my application and try to decide. Thanks for the options guys
Sent from my iPhone using Crappie.com Fishing mobile app
2014 Stinger 195
Drift master rod holders
I wouldn’t say their laying flat at all
Sent from my iPhone using Crappie.com Fishing mobile app
2014 Stinger 195
Drift master rod holders
So it’s just as simple as taking the u bolts off put the spring on top of the axle and tighten it back down with new u bolts?
Sent from my iPhone using Crappie.com Fishing mobile app
2014 Stinger 195
Drift master rod holders
If you don't add a spacer you shouldn't even need new bolts. Those springs look good to me.
Sent from my SM-A102U using Crappie.com Fishing mobile app
That's underslung . the leaf springs have a bolt in the center that tightens them together. That axle has a hole drilled on bottom of 3×3 tube , for king pin or center pin. With u-bolts tight axle can't move. It's underswung. Now you might need small center pin seats on top of axle. You put springs on top for clearance.
I have to ask - did the old tires rub?