Minnow
Boat trailer hub assembly question
Would anyone on here know where to lookup or have access to exact hub assembly for a boat trailer? It’s a 2000 trailstar (tracker) trailer that goes with an 18 ft tracker boat. I can get serial number of trailer if that would help. I’ve tried many websites and even called tracker but have had zero success. Hubs are fine, I’m just wanting to buy a spare to keep handy in case one goes out. Thanks in advance for any tips or info.
Sent from my iPhone using Crappie.com Fishing mobile app
Crappie Wall Hanger II
Would have to take one apart and get a measurement of the spindle. From there you should be able to use any hub that has the right bolt pattern for your wheels, assuming that you don't have oiles hubs or anything special.
They're probably 1 1/16, but no guarantee.
Minnow
Crappie.com Legend
If you can get the serial number off the bearings that should tell you what you need.
The safest way is to pull front nut and cover off and measure the shaft diameter with a caliper.
Most in your size range are 1 1/16" but best to verify.
Mark 1:17 ...I will make you fishers of menBuckeyeCrappie LIKED above post
Minnow
Crappie Wall Hanger II
Pull a hub and measure outer brg. dia. and. Inner brg. dia. and seal dia.
Most trailer mfg. use axles that they buy in bulk . one trailer may have one size, same trailer company trailer 6 months later may be different.
Are you able to replace hub your self ?
Trophy King
What size are your tires? Generally 13-14" wheels will be straight shaft 1 1/16". 15" wheels are usually tapered spindle 1 1/8" to 1 1/16". But if you can't find anything on the web the only sure fired way is to take off and measure. Being it's Tracker, you could call the boat shop at Bass Pro and they could probably tell you.
Minnow
Thanks: 
HaHa: 
Reply With Quote