HaHa HaHa:  0
Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28

Thread: 4stoke question

  1. #21
    Join Date
    Mar 2019
    Location
    Lake Wales, FL
    Posts
    473
    Post Thanks / Like

    Default


    Quote Originally Posted by SeaRay View Post
    Thanks. Set at 360° mine reads fine at idle but maxes out at 2700 at WOT.
    Set on 720° it bounces all over at idle, 800-200 RPMs.
    Gonna recheck wiring and maybe put a pice of tape over wire wrap.
    After talking to dealership they think a 15 SS prop will be fine the boat only weighs 600# without motor, batteries,etc.
    You can get plastic wire loom pretty much anywhere and it makes it easy to shield it from the other wires

    Sent from my SM-G900V using Crappie.com Fishing mobile app

  2. #22
    Join Date
    Oct 2019
    Location
    Cameron N.C.
    Posts
    882
    Post Thanks / Like

    Default

    So it's not a cavitation issue rite ?

  3. #23
    Join Date
    Feb 2011
    Location
    Lexington, South Carolina, United States
    Posts
    8,924
    Post Thanks / Like

    Default

    Quote Originally Posted by Mbsbeek View Post
    So it's not a cavitation issue rite ?
    No, it attaches to a spark plug wire. I suspect the 16' lead I had them put on it may be the issue.
    Mark 1:17 ...I will make you fishers of men

  4. #24
    Join Date
    Jul 2016
    Location
    Brouillette La.
    Posts
    2,360
    Post Thanks / Like

    Default

    I finally got to try the 15" wheel yesterday, the boat gained 2 mph " on my phone " and the tiny tach went to hell. It started giving good readings up to half throttle @ 3200 rpm's then would drop down to 2870 at WOT, gonna call Tiny Tach today and see what they have to say. I searched the web and found aftermarket tach I'm thinking about trying.
    You know me, I'm always ready for a road trip. Chip Newest member of Traveling Team Overalls

  5. #25
    Join Date
    Feb 2011
    Location
    Lexington, South Carolina, United States
    Posts
    8,924
    Post Thanks / Like

    Default

    Skip, got my 15" SS installed and will test tomorrow. I bought this one after trying the 13" . My Tiny Tach worked one time and then it's back to doing same as yours.
    My control box has tach leads somewhere. After Christmas I'm going to locates those leads and install a real tach.
    I did this on my previous boat. Only problem is I don't have a dash to mount it so I need a stand alone type mount.
    Let me know what Tiny T. has to say.
    Mark 1:17 ...I will make you fishers of men

  6. #26
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,388
    Post Thanks / Like

    Default

    Ray, when you decide on tach you might look at something like this for a mount.
    Universal Single Gauge 52mm Console Dashboard Pod
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979



    Thanks SeaRay thanked you for this post

  7. #27
    Join Date
    Feb 2011
    Location
    Lexington, South Carolina, United States
    Posts
    8,924
    Post Thanks / Like

    Default

    Quote Originally Posted by Cray View Post
    Ray, when you decide on tach you might look at something like this for a mount.
    Universal Single Gauge 52mm Console Dashboard Pod
    Thanks, hadn't seen that one.
    Mark 1:17 ...I will make you fishers of men

  8. #28
    Join Date
    Feb 2011
    Location
    Lexington, South Carolina, United States
    Posts
    8,924
    Post Thanks / Like

    Default

    Got to try the new prop today. 15 pitch SS same as the factory aluminum prop. Boat did fine, may have gained 1 or 2 mph but basically just needed to switch to SS due to some areas I fish.
    On a side note, my fickle tach decided to behave today and worked just fine. Maxed out around 5600 RPMs.
    Mark 1:17 ...I will make you fishers of men

Page 3 of 3 FirstFirst 123

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP