SLABSAUCE Fish Attractant |
Likes Likes:  0
Thanks Thanks:  0
Results 1 to 2 of 2

Thread: min kota shaft issue

  1. #1
    Join Date
    Oct 2019
    Location
    Dawson Springs, KY
    Posts
    16
    Post Thanks / Like

    Default min kota shaft issue

    I have a 40lb Min Kota tiller that recently I noticed the pro shaft seems to have extended out another 1/4-1/2" further than it did leaving a gap you can clearly see the shaft between the housing and prop. Any Ideas??? The motor still works fine but the gap bothers me since you can push on the prop and it goes back flush, but when you use it there is the gap

    Mayes

  2. #2
    Join Date
    May 2015
    Location
    Alabama
    Posts
    1,122
    Post Thanks / Like

    Default

    If your saying you can take the prop and push it towards the motor housing. That is normal. Take the prop off. Make sure to catch the pin. Remove the line twisted around it. Check the housing cover bolts for tightness. Then put it back together.

    Sent from my E6810 using Crappie.com Fishing mobile app




Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP