Reply With QuoteI am assuming they are pretty much the same set up. Here is a pretty good guide.
"How-To" 2.5L Optimax Fuel, Direct Injector, and Fuel Rail removal/reinstallation
Likes: 0
Thanks: 0
HaHa: 0
Minnow
Need Help Removing Fuel Rail on 250 Pro XS
The bottom, rear fuel hose on the starboard fuel rail has a slight leak at the very top of where the hose connects to the rail. I need to inspect it but not too sure about pulling the fuel rail. There are 2 bolts attaching the rail to the motor. It it as easy as pulling those bolt heads out or do I have to disconnect all the injectors too? I just want to look under the rail to see what’s going on.
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
I am assuming they are pretty much the same set up. Here is a pretty good guide.
"How-To" 2.5L Optimax Fuel, Direct Injector, and Fuel Rail removal/reinstallation
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum
* Crappie.com Supporter
I am assuming they are pretty much the same set up. Here is a pretty good guide.
"How-To" 2.5L Optimax Fuel, Direct Injector, and Fuel Rail removal/reinstallation
Proud Member of Team Geezer
Charlie Weaver USN/ENC 1965-1979
Minnow
