SLABSAUCE Fish Attractant |
Likes Likes:  0
Thanks Thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Black Widow Ultra

  1. #1
    Barnacle Bill's Avatar
    Barnacle Bill is offline Super Mod and 2014 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Chesapeake, Va
    Posts
    16,745
    Post Thanks / Like

    Default Black Widow Ultra

    Are these easily removeable?
    Fair Winds and Following Seas

    Bill H. PTC USN Ret
    Chesapeake, Va


  2. #2
    Join Date
    Apr 2004
    Location
    Tulsa, Oklahoma, United States
    Posts
    676
    Post Thanks / Like

    Default

    Quote Originally Posted by IBNFSHN
    Are these easily removeable?
    These are absoulutely the best in the buisness let no one kidd you a little higher but well worth it they slide in atrack for easy on off operation and very stable if ya are thinking of them let me know maybe I can save ya a few dollars

  3. #3
    Join Date
    Apr 2004
    Location
    Drexel in western NC
    Posts
    937
    Post Thanks / Like

    Default

    Quote Originally Posted by IBNFSHN
    Are these easily removeable?
    -------------------------------------------------------------------------------------------------------------The base is screwed down. The pole is removed by one small set screw and two thump screws. The thump srews have an additional 7/16 nut lock. Removes in 2 -3 minutes per pole.



  4. #4
    Barnacle Bill's Avatar
    Barnacle Bill is offline Super Mod and 2014 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Chesapeake, Va
    Posts
    16,745
    Post Thanks / Like

    Default

    I need to be able to easily remove the base as one of them has to go where my trolling motor lays in sstored position.
    Fair Winds and Following Seas

    Bill H. PTC USN Ret
    Chesapeake, Va


  5. #5
    Join Date
    Apr 2004
    Posts
    102
    Post Thanks / Like

    Default

    That's part of the beauty of the Bee Ready's. The base is 2" deep and the riser slips down inside it very snugly but you can pull them up and out in about two seconds. No thumb screws, nuts or bolts to remove. I installed mine today. Threy are very solid when bolted through the deck.

  6. #6
    Barnacle Bill's Avatar
    Barnacle Bill is offline Super Mod and 2014 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Chesapeake, Va
    Posts
    16,745
    Post Thanks / Like

    Default

    Quote Originally Posted by Bart
    That's part of the beauty of the Bee Ready's. The base is 2" deep and the riser slips down inside it very snugly but you can pull them up and out in about two seconds. No thumb screws, nuts or bolts to remove. I installed mine today. Threy are very solid when bolted through the deck.
    I don't have access to under the deck.
    Fair Winds and Following Seas

    Bill H. PTC USN Ret
    Chesapeake, Va


  7. #7
    Join Date
    Apr 2004
    Location
    Drexel in western NC
    Posts
    937
    Post Thanks / Like

    Default

    Quote Originally Posted by IBNFSHN
    I need to be able to easily remove the base as one of them has to go where my trolling motor lays in sstored position.
    -------------------------------------------------------------------------------------------------- If you have to remove it every time you raise the trolling motor the tite loc would not be satisfactory. The drift master can be removed easier but still would require about a minute to loosen the lock nut and unscrew the assembly.



  8. #8
    Join Date
    Feb 2005
    Location
    Ocala, Fl
    Posts
    269
    Post Thanks / Like

    Default

    I have to remove my BPS Titelok everytime I put the trolling motor up or down, all I have to do is turn a handled screw half a turn and thats it, just lift straight up out of the base and put away. You can also slide the main bar through the mount into the belly of the boat adjusting the height of the T-bar. Thats something I don't think the ultra can do since its on a track mount.

  9. #9
    Join Date
    Apr 2004
    Location
    Drexel in western NC
    Posts
    937
    Post Thanks / Like

    Default

    Quote Originally Posted by Crapbie
    I have to remove my BPS Titelok everytime I put the trolling motor up or down, all I have to do is turn a handled screw half a turn and thats it, just lift straight up out of the base and put away. You can also slide the main bar through the mount into the belly of the boat adjusting the height of the T-bar. Thats something I don't think the ultra can do since its on a track mount.
    ----------------------------------------------------------------------------------------------------------------------------------------------------------You cannot do that with the ultra.



  10. #10
    Barnacle Bill's Avatar
    Barnacle Bill is offline Super Mod and 2014 Crappie.com Man of the Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    Chesapeake, Va
    Posts
    16,745
    Post Thanks / Like

    Default

    I sent an E-mail to Jeannie at CrappieStuff.com and told her what I needed to do. She implied that either the pro or the ultra can be removed fairly easily. I guess that 1" shaft on the Pro model would make it pretty sturdy and since I can't get under the deck, I could mount the base with lag type screws.
    Fair Winds and Following Seas

    Bill H. PTC USN Ret
    Chesapeake, Va


Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP