You can buy the correct pin and flange to fit the Millineum seats. Another option would be to drill or slot the ones you have to fit the seats
I bought this old boat that has been a one owner since new and was in remarkable shape. Had a couple of wiring issues and a throttle cable problem that turned out to be no big deal. Only problem is the original seat pedestals are bolted to the seat I want to mount my millenniums on it but the hole in the mount is bigger than a standard pedestal any advise
Sent from my iPhone using Crappie.com
S10CHEVY, SpeckledSlab LIKED above post
You can buy the correct pin and flange to fit the Millineum seats. Another option would be to drill or slot the ones you have to fit the seats
The love for fishing is one of the best gifts you can pass alongmurdok thanked you for this post
What G said
The love for fishing is one of the best gifts you can pass along
They sell just the bushing kits for those 1.77” snap lock pedestals,,,I would cut the top off unless it’s already open and install the newer style bushings like my 97 uses,,Springfield makes everything you want for the pedestals ….this is what mine looks like except non hydraulic,,,you have to measure to see what size post you have,,,this is 1.77” snap lock
This is who I used. Usaboatparts.net. Call them and tell them what your need,,,,Andy
Definitely Not the same 1.77” as mine,,,,I’d call them and tell them what you want,,either a replacement pedestal or something to make it work,,,
Ranger boats
Perotti pro holders
Avery outdoors superstore