Thanks: 
HaHa: 
Reply With QuoteWhy would they not handle a 1/32 jig ? I use one on my 10 foot rods ! I just add a crimp on 1/8 oz. above the jig about 12- 14 inc. up. it works just fine.
Crappie Wall Hanger
about these 2 rods
on my previous post about a 7.5ft acc rod shyed away after a few members said this pole will not handle the 1/32 jigs, so now i am looking at rods again, i would like to get some thoughts on these 2 rods the ACC crappie stix GS66M and the Pro Angler 6 1/2 ft since these 2 rods are the same length has anyone fished both these rods and possible tell me which may still have a decent backbone and still cast some lighter jigs, or which may be the better choice for crappie fishing.
ps a little late but was also reading about this one too BnM Lelands TCB 6.5ft
chet
Last edited by chetc; 07-11-2021 at 07:36 AM.
Slabmaster II
Why would they not handle a 1/32 jig ? I use one on my 10 foot rods ! I just add a crimp on 1/8 oz. above the jig about 12- 14 inc. up. it works just fine.
I would agree with you, but then we would both be WRONG !!!!
Crappie.com Legend
That rod has been recommended to you before. It’s an excellent rod. It’s better than anything else you’ve been considering, IMO.Originally Posted by chetc
Alphahawk LIKED above post
