HaHa HaHa:  0
Results 1 to 7 of 7

Thread: Pushing for Crappie

  1. #1
    Join Date
    Apr 1996
    Location
    Central Florida
    Posts
    25,841
    Post Thanks / Like

    Thumbs up Pushing for Crappie


    Name:  overhead landing of pushing for crappie.jpg
Views: 803
Size:  61.3 KB
    Of all the techniques used to catch crappie pushing is by far the most powerful. Heavy action rods, super strong braid fishing line with substantial leaders, weighty weights and big baitcasting reels to crank up the crappie once they bite. Amazingly even with all the bulky tackle crappie just can’t resist biting a crankbait being pushed.


    “Pushing is when an angler uses a heavy weight to keep a crankbait in the strike zone normally dropped straight down from a tip of a fishing rod secured in a rod holder; the angler sits in the bow of the boat with their rods at a 45 degree angle outward keeping the trolling motor from running over the fishing line dropped in front or off to the side of the bow of the boat,” said pushing expert Scott Vance.

    Vance uses a right triangle theory to figure out how much fishing line to let out to keep a crankbait running at a certain depth. “You can figure a crankbait being pushed is going to run 2/3rd the depth (45 degree angle) of the line from the surface of the lake to the lure. For example a crankbait that has 15 feet of line out with a 3-ounce weight will be running about 10 feet deep around at 1.4- to 1.8-mph,” said Vance. Other factors like line size, size of weight being used and crankbait style can make in what depth the crankbait is running at when pushing.


    His typical rig setup is 20 pound braid as a main line tied to a snap swivel then a 3-ounce pushing weight with a 20 pound test monofilament leader that has a Duo Lock snap on the end where he clips on his crankbait. Since it’s a hefty rig, Vance fishes with Southern Crappie Rods pushing rod design for this technique. Vance noted that it’s hard to see a bite sometimes when pushing a crankbait with a heavy weight, however, it’s not uncommon for him to reel in every once in a while to check for a small crappie that is hooked up.

    Name:  overhead landing of pushing for crappie 1.jpg
Views: 735
Size:  52.9 KB

    Normally, Vance will use PICO Lures (www.picolures.com) INT deeper diving crankbait. “Each day is different so I will change lure color and crankbait style accordingly. Typically, I start out with solid white color patterns to solid black and when I catch two crappie on that color pattern I will switch the other color out for them. I will say that in stained water, I like a darker color pattern and in clear water a white or brighter color patterns. Every day is different according to the clarity of the water and sun rays through the water,” said Vance.

    Another “pusher” is crappie pro Kent Driscoll. Driscoll like a number of other crappie pros is using Garmin LiveScope to actually see crappie and watch them live bite his crankbait when pushing his lure in front of the boat. “When I’m pushing a crankbait at 1.3- to 1.6-mph, I will only use one pole, but set it up just like everyone else when pushing. What I’m doing is watching for crappie and schools of shad in front of the boat with my Garmin set at a range of 50 feet and letting out just the right amount of line to put the crankbait right in the crappie face where they will bite it,” said B’n’M’ Poles Pro Staff Manager Driscoll.


    Unlike other pushers, Driscoll likes to use a lighter 2-ounce weight instead of a 3-ounce weight which allows him to use a lighter action rod like the B’n’M’ Poles (www.bnmpoles.com) Pro Staff Trolling Rods. Driscoll noted that there are crappie anglers out pushing using 3-ounce weights which requires a stiffer rod like the B’n’M’ Poles Pow-R-Troller that’s a stiffer rod.

    Name:  PICO deep diving and squarebill crankbaits can be used when pushing for crappie.jpg
Views: 833
Size:  63.5 KB
    - Article by Brad Wiegmann (nice shirt)


    Owner
    "Wear your PFD" "No texting n driving" slab
    Crappie.com members are the best
    Thanks mcdye thanked you for this post

  2. #2
    Billbob's Avatar
    Billbob is offline Crappie.com Legend - 2013 Guber Of The Year * Crappie.com Supporter
    Join Date
    Apr 2004
    Location
    md. st. in.
    Posts
    16,451
    Post Thanks / Like

    Default

    Good read


    Sent from my iPhone using Crappie.com Fishing mobile app
    PROUD MEMBER OF TEAM GEEZER

    Crappie.com Pro Staff
    Guber Pro Staff
    Cane Pole Pro Staff
    Haulin Ash Pro Staff
    Likes rebranger LIKED above post

  3. #3
    Join Date
    Sep 2017
    Location
    PA
    Posts
    307
    Post Thanks / Like

    Default

    Can you use a heavy mono or is braided line a must.?

    Sent from my LML212VL using Crappie.com Fishing mobile app
    Likes rebranger LIKED above post

  4. #4
    Join Date
    Apr 1996
    Location
    Central Florida
    Posts
    25,841
    Post Thanks / Like

    Default

    Quote Originally Posted by patrapper View Post
    Can you use a heavy mono or is braided line a must.?

    Sent from my LML212VL using Crappie.com Fishing mobile app
    I think mono will work fine as well.
    Owner
    "Wear your PFD" "No texting n driving" slab
    Crappie.com members are the best
    Likes rebranger LIKED above post

  5. #5
    "G"'s Avatar
    "G" is offline Super Duper Moderator - 2012 Crappie.Com Man of the year & 2018 Crappie.com Decade of Exceptional Service Awards * Crappie.com Supporter * Member Sponsor
    Join Date
    Aug 2008
    Location
    Belden, MS
    Posts
    95,225
    Post Thanks / Like

    Default

    I use 10 lb. mono....have for years
    I have spent most my life fishing........the rest I wasted.
    PROUD MEMBER OF TEAM GEEZER
    PICO Lures Field Rep

  6. #6
    Join Date
    Apr 2010
    Location
    Collinsville, MS
    Posts
    10,394
    Post Thanks / Like

    Default

    Mono will work as well as braid, and maybe better, but I fish stump beds in less than 10 ft of water a lot. When hung up I get my crankbait back 80% of the time using the braid. I also use the braid when pulling crankbaits. When you have 100 ft of line out fishing somewhere like Grenada,
    there's a factor of line stretch to look at. With braid, I can see if a piece of pine straw gets hung onto my lure by watching the vibrations of my rod tip. Mono will stretch and the rod tip vibrations aren't as telling. Line type is totally a personal choice and each has advantages. Good fishing C.com Brothers and Sisters.

    Sent from my SM-G892A using Crappie.com Fishing mobile app
    PROUD MEMBER OF TEAM GEEZER
    ScottV's Custom Crappie Cranks
    Crankbait Pushing Weights
    Likes crappie flash, Billbob, rebranger LIKED above post

  7. #7
    Join Date
    Sep 2004
    Location
    Toledo Bend In Texas
    Posts
    18,444
    Post Thanks / Like

    Default

    Love the info, thanks for the post!

    Skip

    Peak Vise Dealer
    Tying Materials, Chenille and Hackle
    For Pictures of my Crystal, Nylon/Rayon or
    New Age Chenille Please PM Me! Also I
    have the Saltwater Neck Hackle and some
    colors of Marabou plus other things!
    Likes crappie flash, rebranger LIKED above post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP