Is it stuck down or not working at all?
Hello out on the water right now with my new Ulterra trying to get it come work all the lights is lit up say motor not found Can someone help me out little here
Little John
Sent from my moto g(7) power using Crappie.com Fishing mobile app
Is it stuck down or not working at all?
How do I learn/pair the Micro Remote to my i-Pilot or i-Pilot Link?
To pair your Micro remote, please follow these steps:
Power up the trolling motor.
Push and hold the learn or pair button down on trolling motor head. A steady audio tone will be heard while holding this button.
While continuing to hold the learn or pair button, push and hold the High Speed Bypass and AutoPilot keys simultaneously on micro remote for up to 3 seconds. Three beeps will be heard from the i-Pilot controller when the remote is successfully learned.
PLEASE NOTE: There are two versions of the Micro Remote - one that works with Bluetooth® compatibile i-Pilot and i-Pilot Link systems, and one that is for older systems that are not Bluetooth compatible. A Bluetooth-compatible Micro Remote will not work with a non-Bluetooth compatible i-Pilot or i-Pilot Link system, and vis versa. Please make sure that your Micro Remote is the appropriate version for your i-Pilot or i-Pilot Link system. To confirm, check the Micro Remote packaging for a compatibility statement similar to the following:
Which remote do you have?
I've the I pilot link for the Ulterra. This is anew remote first time on water. Won't let me navigate through screen. I it Deploy on my helix it started to deploy but didn't leave enough slack so it stop in the pause mode now can't get it how the pause mode.
Sent from my moto g(7) power using Crappie.com Fishing mobile app
I would call Minnkota at 1 800 227 6433
I assume you are no longer on the water
Move them up/down button to Options, scroll down to pair, hit the check mark button on the remote to select pair while pushing the button on the TM head and it should pair right up. This happens to me a lot as I toggle off the batteries to the TM when on trailer. It has to pair before any of the other functions will work.
Sent from my iPad using Crappie.com
Move the up/down button to Options, scroll down to pair, hit the check mark button on the remote to select pair while pushing the button on the TM head and it should pair right up. This happens to me a lot as I toggle off the batteries to the TM when on trailer. It has to pair before any of the other functions will work.
Sent from my iPad using Crappie.com