101 Redneck Ideas, Contest...

[scrat]

DIY transducer shield. I cut and split a 4" PVC cap and pipe to make a shield to help protect my transducer.

[Don Fischer]

On my golden rule measure board I drilled a 1/8 hole just over the 10 inch mark. if the fish dont cover the hole when measured it goes back in the water. Its easier to see when the board is all slimed up plus it insures that its legal in case of shrinkage of the fish after being caught.

Well your no fisherman! When I catch fish they get bigger with each telling! :-)

[shipahoy41]

Nice

[captdave]

This is a great thread! Daggum McGyver rednecks up in here...

[Cane Pole]

Home made ram mounts installed.


S

[Cane Pole]

Another ram mount. This was made from an articulated tv mount. I removed one arm and mounted the ram ball thru the arm joint. Cheep articulated mount.

[dbowling]

good idea on the tv mount arm..

Another ram mount. This was made from an articulated tv mount. I removed one arm and mounted the ram ball thru the arm joint. Cheep articulated mount.

[Cane Pole]

A reminder...........................

[Hanr3]

I have a bunch of innovative creations, some boat/fishing related, some not.
My boat didn't come with a method to attach stuff to the gunnel, so I added a t-track and made custom brackets for rod holders, beverages, lures, etc.



I needed method to bend it and made a jig for the task.


Mounted it to the boat.


Added a few rod holders. The rod holders are brackets that I salvaged from a previous job. Farmers would return the heads-up display and the brackets. the brackets would end up in the scrap bin so I grabbed a couple dozen. Appears I don't have any pictures of the brackets installed.

[Hanr3]

I also added a box to the tongue of the trailer to store boat, trailer related gear. Grease, oil, spare hubs, spare prop and nut, floor jack, rags, fillet gear/knives, etc. I also use the box as my path into and out of the boat at the ramp. step on tongue, on box and into the boat. Keeps my feet dry.