Pushing Crank Baits Tips for Beginner

[Rattler99]

Great info for a newbie like me! Thanks for sharing!

[Foxy Jig]

dumb question but you guys using the trolling motor to go that fast?

[cevans]

tel:4114116[/URL]"]4114116[/URL]]dumb question but you guys using the trolling motor to go that fast?

Yeppers! No question is a dumb question. Ask any question anytime!

[Foxy Jig]

Yeppers! No question is a dumb question. Ask any question anytime!

good to hear

so if your trolling motor had speeds 1 to 10, about what number would you be on to hit those speeds?

thanks!

[cevans]

I’m using a fully rigged 1648 g3 jon boat that has a approx weight with me in it at 1000 lbs using a 55 amp MK power v2 12 v. Trolling motor and run the speed setting at 5-6. I also am using lithium batteries so I do get constant way better voltage to the motor with no loss of power to the motor in a full day of trolling. I run a HB 10 MDI g3n and 12:MDI G4N on the front with a mega 360 and a 9 MSI g2n on the back. 25 Yamaha on the back mounted in a trim/tilt plate and 100 amp lithium in back for motor and electronics also.,

[KrappieKrane]

Great post and thanks to all for sharing advice. I just learned that I’m too slow and too light when pushing cranks. Thanks

[KrappieKrane]

Great post and thanks to all for sharing advice. I just learned that I’m too slow and too light when pushing cranks. Thanks