:D:D:D
Printable View
NASA would like it's shuttle cockpit back..... lol
Looks good , and gives me some ideas. My stuff isn't up to what you have, but the mounting the GPS on the riser is something I've already kicked around. I bet it was simple. I'll post when I get it off the ground. Thanks again for the idea.
How easy is it to get to and raise the trolling motor if you need to change locations? Do you have to remove the rod holders on the left? Thanks for the info. Very nice set-up.
Good looking set up. I didn't know that anyone other than Bee Ready had that design holder. I have the Bee Ready and they work really well.
Good for you!
Skip
hey cane pole, I ordered some Hi-teks today, I like your setup and am intrested in putting a handheld gps or depth finder on em like you have, do you have any pics of the brackets you made, or how they are attached?
I used 2 pieces of aluminum flat stock. I bolted a small ram mount to on piece of flat stock and used the other as a back plate. I bolted the 2 pieces of flat stock together and sandwiched the rod holder pole between the pieces of flat stock and bolted them together. Kinda like a flat c clamp. I can adjust the height on the pole by loosening the flat stock bolts and sliding the whole rig. No holes were drilled in the pole holder.
Works pretty good. This mount is temp. I will get one machined to make it purdy if I find a willing machinist.:D