HaHa: 
Reply With QuoteCheck the "kill switch".....
Crappie Wall Hanger II
I need some help
I have a 50 hp 2 stroke mercury, I can put the muffs on it & hook hose on them it cranks & runs fine. When I go to the lake & pump the bulb it doesn’t want to start. Any ideas ?
I live in Oklahoma know and where I live a good motor mechanic is hard to find. It might be home sick for La.
Thanks
Sent from my iPhone using Crappie.com
Crappie.com Legend
Check the "kill switch".....
The "King" is coming
This could be the Day....
RETIRED LOUISIANA CRAPPIE HUNTERFish on Line LIKED above post
Crappie Wall Hanger II
Louisiana Moderator
* Crappie.com Supporter
You would probably get a lot of helpful suggestions if you also posted this in the Mechanics Corner forum.
Proud member of Team Geezer!
The grass withers and the flower fades, but the word of our God shall stand forever.
Crappie Wall Hanger II
Sounds like dirty low speed jets (gummed up by old fuel). Back pressure caused by having the exhaust in the water requires a richer mixture. May need a carb rebuild.
Fish on Line thanked you for this post
Crappie.com 1K Star General
Do you have good compression
Sent from my SM-G975U using Tapatalk
Crappie Wall Hanger II
Sounds like a fuel mixture problem. If it is too lean it will not start in the water but will on the muffs. May need a good cleaning
Sent from my SM-G892A using Tapatalk
Crappie Wall Hanger II
Got a fuel pump rebuild kit today. Going to rebuild it first if that doesn’t help rebuilding carbs. I changed the fuel line & bulb went with black fuel hose from Napa. No more E10 for me I cut old fuel line in sections, it was almost stoped up, yes I used fuel additive
Sent from my iPhone using Crappie.com
Crappie Wall Hanger
How old is it? I had an older model merc that was doing that and found that it had a mercury switch inside the motor cowling. Removed the switch and had no more issues
Sent from my SM-G900V using Crappie.com Fishing mobile app
Crappie Wall Hanger II
