Originally Posted by
canebreaker
Elevating the stadium seat in my sit in kayak. Seems my legs straight out don't last long before hurting. I removed the padded seat, using the same holes I mounted half inch pvc in a V angle. Cut a piece of 1/4" plywood that fits where the pad was and screwed it to the pvc. Gives me 1" lift, hope it helps. I'll remove the plywood, give it a good sanding today. Mix Hunter Green paint and linseed oil for the first coat, maybe 2 to make it water resistance then a couple of coats of the paint. If the 1/2" pvc isn't high enough I've got lots of thicker pieces.
Trolling motor was delivered today. Collecting aluminum stock for the transom. Will start after Christmas.