HaHa HaHa:  0
Results 1 to 10 of 10

Thread: Hotwoods pontoons vs. Pondtoon pontoos'

  1. #1
    Join Date
    Feb 2017
    Location
    FLORIDA
    Posts
    65
    Post Thanks / Like

    Default Hotwoods pontoons vs. Pondtoon pontoos'


    Hi all,

    I was thinking about getting a Pelican Bass Raider and car top it so I wouldn't have to get a trailer, but being handicapped (my equilibrium is really messed up) I thought how the heck was I going to get into it? A small pontoon was more practical because of the railing and flat floor.

    I'm considering the Hotwoods line and the Pondtoon line. I like the fact that the Hotwoods had 4 logs instead of 2 like the Pondtoon and sits lower in the water because the logs are smaller in diameter. The Hotwoods boats have rounded handrails while the Pondtoon uses square ones. (for some reason I like rounded instead of square. The Pondtoon has a protruding bow and the Hotwoods is more "barge" like.
    Any recommedations?




    Name:  hotwoods.jpg
Views: 3146
Size:  73.2 KB
    Name:  pondtoon.jpg
Views: 2242
Size:  116.5 KB
    Last edited by CrappiePappy; 07-16-2018 at 12:37 PM.
    WHAT WE'VE GOT HERE IS...FAILURE TO COMMUNICATE

    YOU CAN'T FIX STUPID

  2. #2
    Join Date
    May 2018
    Location
    Central Florida
    Posts
    19,115
    Post Thanks / Like

    Default

    Have you viewed any video's, or talked to anyone that has been in one, of either of these in choppy or semi-rough conditions? It is advertised for ponds and lakes. It does not take much of lake to get really rough, in a short period of time. With that being said I would have a variety of ways for securing carry-on items (i.e. dry-boxes, straps, etc.), just in case you where caught off guard. Also if a storm was to blow up on you, I would say drop the bimini top immediately as it might assist in capsizing the craft. I agree with you on the tubing on the Hotwoods model, they offer a lower railing package than the one pictured, which might be needed to fish seated. I didn't see one with in-line seating like the Pondtoon shows, which seems better for weight distribution. Good luck with your decision.
    Last edited by SpeckledSlab; 07-15-2018 at 12:34 AM.
    Pass the "Sportsman Baton" on before you're gone, promote values for others to hunt and fish upon.

  3. #3
    skeetbum's Avatar
    skeetbum is offline Crappie.com Legend - Moderator Jig Tying Forum
    Join Date
    Dec 2007
    Location
    Florida
    Posts
    22,856
    Post Thanks / Like

    Default

    Cane Pole is the man with a pontoon. Mr. Modification. Hook up with him and get smart answers
    Creativity is just intelligence fooling around

  4. #4
    Join Date
    Oct 2016
    Location
    Lakeland, FL
    Posts
    462
    Post Thanks / Like

    Default

    Here's mine. It doesn't really help with your post, as this is an old 15'x6' Godfrey that I rebuilt from the crossmembers up. I will echo the sentiments above, that it's a bit sketchy in anything rough, but I've had it in Tampa bay 1-2' chop a couple times and it did OK.

    Name:  toon.jpg
Views: 2494
Size:  122.1 KB

  5. #5
    Redge is offline Crappie.com Legend - 2017 Man Of The Year
    Join Date
    Mar 2010
    Location
    OK
    Posts
    27,548
    Post Thanks / Like

    Default

    Good luck and I’ll echo pm Cane Pole.


    Sent from my iPhone using Crappie.com Fishing mobile app
    Proud Member of Team Geezer!

  6. #6
    Join Date
    Oct 2017
    Location
    Oldham, Kentucky
    Posts
    509
    Post Thanks / Like

    Default

    Angerqwest has a Gillgetter series that are about the same size. https://www.anglerqwestpontoons.com/pontoons/gillgetter
    Eric

  7. #7
    Join Date
    Feb 2017
    Location
    FLORIDA
    Posts
    65
    Post Thanks / Like

    Default

    Thanks guys for your input. I don't plan on taking it out in saltwater. Just smaller lakes and ponds. I've been out in rough water many times before, but I was younger then and more physically able then I am now. I've always been very aware of the weather and am not going out far from land anymore. Safety has always been my main concern when going out on the water
    WHAT WE'VE GOT HERE IS...FAILURE TO COMMUNICATE

    YOU CAN'T FIX STUPID
    Likes SpeckledSlab LIKED above post

  8. #8
    Join Date
    Apr 2014
    Location
    Lakeland, Florida
    Posts
    2,165
    Post Thanks / Like

    Default

    Ahhh, decisions, decisions. lol. Just my opinion, think I would take a ride in each of the pontoons before choosing. I hope you find what you want, best of luck. Hotwoods pontoons vs. Pondtoon pontoos'


    Sent from my iPhone using Crappie.com Fishing mobile app
    What time is it? IT'S CRAPPIE TIME!

  9. #9
    Join Date
    Jul 2008
    Location
    Jacksonville, FL
    Posts
    454
    Post Thanks / Like

    Default

    You might want to contact the old PondToon dealers in Florida. They no longer carry them. I'll let them tell you why.

    Meanwhile, I am outfitting a new (to me) little pontoon too. Here is the journey so far. It is a 14 foot Playbuoy Eagle Jr., with a 6 foot beam and a 20hp Suzuki 4-stroke.

    Photos show what I have done so far.

    1. The old seats were in poor shape after sitting unused in the Florida sun for several years. And some of the plywood had deteriorated pretty badly.
    So all the seats were removed and trashed. Amazingly, the deck was in great shape, no rot anywhere.

    2. All seats were replaced by Coleman Xtreme coolers. 120 and 60 qt. sizes. Figured a cushion on the coolers would work for seating, and it did a good job during trials. But we had no way to lean back and my fishing buddy, Don, and I are basically lazy. He has even been known to fall asleep trolling around tightlining/spiderrigging before.

    3. Photo 5 shows the first place I mounted my new Millennium Spyder LOK rod holders. Got the rods as far as possible up front, but when we started catching fish, it proved to be VERY awkward getting up and getting to the rods. Bad idea. So I moved them as you will see in another photo. But first a word about Millennium Spyder LOK rod holders. GREAT. That's the word. GREAT. They beat anything I have ever seen or used. Hands down.

    4. The trailer didn't have guideons, and that wasn't really a problem launching and recovering. But it was a problem backing the trailer when the boat was not on it. I drive a Ford 250 4x4 Diesel Crew Cab. Big truck I used to pull my 26 foot offshore ProCat when I had it. But the trailer disappears behind it with the boat not there to see. The guideons stick up so I can see them in my mirrors now. There is a problem though. A pontoon bot has no pointed bow. It's like steering around a sheet of plywood. At the front, you have to get the deck EXACTLY lined up to get through the gate. The guideons might not stay.

    5. Photos 8, 9, and 10 show the new layout. I re-mounted the pedestal seats back on the inside of the playpen, and moved the rod holders back so the rods are within hands reach. The large 120 cooler up front was removed, keeping the 60 for ice. I am leaving the 120 and 60 in back to act as the rear "bench" seat and provide dry storage. The seats work fine there and will be much more comfortable.


    That's the process so far. Just a cheap little pontoon to chase a few crappie. It will never be a speedboat with the little 20hp motor but here in Florida the lakes aren't all that big anyway. The flat deck helps out old joints having to step up and down too.

    Tom
    Attached Images Attached Images           
    Thanks CRAPPIE DABBA DOO thanked you for this post

  10. #10
    Join Date
    Mar 2018
    Location
    NE FL
    Posts
    145
    Post Thanks / Like

    Default

    Yep we will see how the new lay out fishes in the morning. Tom didn't mention he also put rod holder mounts on the aft deck so we are going to pull some crank baits in the morning.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP