we Trim the motor up
Has anyone had any trouble seeing both ways after mounting their transducer , I have an aluminum 17 ft. tracker and want to check before mounting my transdcer . I have heard of some people buying two transducer to see out of the left side because the motor is blocking the veiw ?
we Trim the motor up
FISH-ON!!!!!
Its not cheap but I bought it the same time I bought the Humminbird 997. I think the extra transducer was like $250 but I'm really happy with it. I get as clear of images as there are. You can check them out for yourself.
http://www.accuemap.com/
Since I make maps I wanted to make sure I had the best. It also means I have a spare. All I have to do is take the Y cable out and hook to the good side.
Not every one has a problem but I'm using a 20hp which doesn't have much gap between it and the transom.
WarrenMN
I fish, therefore I am
I have a targa 17' with a 90 on it and have no problems seeing both sides.
I mounted it about in the same place as the original was mounted.
I just mounted it a little lower to get it to work at higher speeds.
It worked for me.
Fishing is a way of life. Teach your grandchildren to fish, hunt and enjoy the outdoors
Here is a picture of the 997 transducer installed in the same location as the original transducer for the 17.5' Tracker. I have no trouble seeing both sides.
Keith
2008 NWR Bash Crappie Champion
2010 NWR Bash Yellow Perch Champion
2010 Buggs Bash Smallest Crappie Award
That what I was looking for , just wanted to do it once and not have to many holes in the boat . I appreciate the replys and good luck this year.
The star board (plastic wood) is screwed and glued to the boat. I used the same holes as the old transducer. The new transducer is screwed to the star board.
Keith
2008 NWR Bash Crappie Champion
2010 NWR Bash Yellow Perch Champion
2010 Buggs Bash Smallest Crappie Award