Thanks: 
HaHa: 
Reply With QuoteIt will, but the box still draws a tiny bit of power. Need to put it on a switch or keep unplugging the battery.
Slabmaster II
LiveScope On/Off question
I repowered my LS/1222 settup. I put entire settup on dedicated Lithium battery. I have been unplugging Positive connection when not fishing. When I turn system off with graph, does that kill the power to Blk Bx and transducer also?
Crappie.com Legend
* Crappie.com Supporter
It will, but the box still draws a tiny bit of power. Need to put it on a switch or keep unplugging the battery.
2018 G3 Sportsman 17
2018 Yamaha F90 four stroke
Ultra 106sv bow/console
Livescope Terrova 24v Ionic lithium batteries
Slabmaster II
Minnow
I put my Garmin on sleep mode while traveling on the water, and have an in-line switch to turn the power off to the black box when the device isn't in use. Just a plain on/off toggle switch works fine - I use the marine grade switch with the rubber boot.
grizwilson LIKED above post
Slabmaster
After shutting down my 93sv’s linked together I still heard my livescope ducer pinging never noticed this before. It did quit after killing the switch that powers the electronics. I always disable the ducer while running longer spots and while doing updates. I have read the ducer can overheat if not in the water
Slabmaster II
i have heard rumors of the ducer overheating if not in the water also any truth to this
Crappie.com 1K Star General
When on the water go to sonar setup then click transmit & turn it off. When getting to you next fishing spot click transmit again to turn it back on. As far as when parked at home you either need a master to turn power off to everything or a dedicated power switch specifically for the live scope system that will cut power off to the black box. I made a battery box that i have installed in a rod locker with a fused power switch that turns the complete system off when i'm done fishing. When fishing i just turn transmit off at the head unit on the sonar set up page & when i get to my next spot i turn transmit back on. When loading up to go home i just reach into the rod locker after turning head unit off & turn main power switch off. Get home & charge when parking in garage & good to go next time.Originally Posted by shaved ice
