battery post for Ampere Time LiFePO4 Deep Cycle Battery

**gi53** · 12-19-2021, 03:32 PM

Hi, I just ordered a Ampere Time Lithium Iron battery and I noticed that it does not have terminals like a normal battery, will I have to cut off the ends of my cables and replace them with something else, or is there another way of doing it? Thanks

**DockShootinJack** · 12-19-2021, 04:19 PM

There are several ways of doing it. A photo of the battery would help to get you on the right track

**tlefire** · 12-19-2021, 04:38 PM

They are just upside down bolts. Get a good copper end to crimp on your wires.

**Barnacle Bill** · 12-19-2021, 04:52 PM

It depends on which battery you got. You don't need to modify the cables.

**cevans** · 12-19-2021, 04:53 PM

You might check out these terminal adaptors. TERMINAL ADAPTER - Drewcraft LLC

**tlefire** · 12-19-2021, 07:53 PM

Name: 12v50ah-_-Amperetime_lithium_lifepo4_battery.png
Views: 197
Size: 11.7 KB

Every battery listed on their website has these post.

Name: 20211123_151400.jpg
Views: 259
Size: 58.2 KB

Well can't see those very well. They look like this.

**DockShootinJack** · 12-20-2021, 06:02 AM

Originally Posted by tlefire

They are just upside down bolts. Get a good copper end to crimp on your wires.

This is the way I would do it as well. Make sure cable is clean, a dab of dielectric grease worked into the wire to prevent corrosion, crimp the terminal on and cover with a piece of heatshrink tubing to add protection and make a neat job out of it.

**tlefire** · 12-21-2021, 01:13 PM

Well I was wrong about the post. They are regular bolts that screw into the battery.

Thread: battery post for Ampere Time LiFePO4 Deep Cycle Battery

Thread Tools

Display

battery post for Ampere Time LiFePO4 Deep Cycle Battery

Tags for this Thread

Posting Permissions