The picture is perfectly clear. You can easy see.
Sorry not good on attachments
It is not aligned straight down, rather cocked at an angle pointing sideways about 15-20 degrees. That would affect my sonar readings wouldn’t it ?
HB Helix GN 2d sonar only
Maybe they will bite this one……
The picture is perfectly clear. You can easy see.
Sorry not good on attachments
Maybe they will bite this one……
The fish it marks are not shown as arcs. I can see baitballs and bumps on the bottom, but the suspended fish should be shown as arcs.
I am suspicious the transducer is the issue here.
Maybe they will bite this one……
Arcs are created by the target being in the Sonar cone long enough to be at different distances from the transducer as the target passes thru the Sonar cone ...
Can you post a picture or your transducer installation ...??
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
A photo would certainly help
The love for fishing is one of the best gifts you can pass along
Not sure you can see it, but it is mounted at an angle.
Whenever I get up to about 15mph I cease getting depth readings and the numbers on the screen go crazy wild. The only number that makes sense is speed at that point. I also see water splashing upwards off the unit when moving.
Maybe they will bite this one……
The should be pointed straight down. I would say at 15mph is when it air is starting to be drawn down around the transducer causing it to lose the reading.
The love for fishing is one of the best gifts you can pass along
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar AdvisorMicanopy thanked you for this post