Reply With QuoteIf the HELIX 7 is the G3N - it is networkable to the 899 ...
Make sure both units are set to “Share Waypoints” under the Network tab ...
Rickie
Likes: 0
Thanks: 0
HaHa: 0
Slabmaster II
Humminbird network old 899 to helix 7
I have an older 899ci HD SI in the rear and have it networked. I just had to upgrade my front unit and got a helix 7 gen3. I went out today and tried to pull my waypoints up from the 899 on the helix 7 and no go. They are compatible correct? I just want to make sure before I start tracing wires etc to find the problem.
Crappie.com 2016 Man of the Year
* Member Sponsor
If the HELIX 7 is the G3N - it is networkable to the 899 ...
Make sure both units are set to “Share Waypoints” under the Network tab ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
Trophy King
Did you verify you had a network established between the two units (Network Menu)?
Slabmaster II
I went to the network menu and changed each one to share waypoints. When I then looked at the network source, it only shows 1 unit. It does not show both unitsOriginally Posted by ezfishn
Crappie.com 2016 Man of the Year
* Member Sponsor
You may need to update the 899 to the latest software to get it to Network correctly ...
Rickie
www.podunkideas.com <--Click here
------------—————
https://www.crappie-gills-n-more.com/
https://cornfieldfishinggear.com/
------------------------>> Pro Staff Sonar Advisor
