Likes: 
Thanks: 
HaHa: 
Reply With QuoteIt is a 24v/48# Minn Kota older power drive. It is now refered to as Legacy. It's the motor with the flat plug on the pedal control
Could a pwm take the place of the board
Sent from my E6810 using Crappie.com Fishing mobile app
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
what trolling motor model are we talking about?
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com 3K Star General
* Crappie.com Supporter
It is a 24v/48# Minn Kota older power drive. It is now refered to as Legacy. It's the motor with the flat plug on the pedal control
Could a pwm take the place of the board
Sent from my E6810 using Crappie.com Fishing mobile app
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
Originally Posted by catchNgrease
yes, but the big problem is waterproofing and cooling the pwm FETs.
Have you checked your foot pedal? There is a slide potentiometer that might not be working properly.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com 3K Star General
* Crappie.com Supporter
I have not checked the pedal. I'll open it and clean it today.
Thanks for helping me.
Sent from my E6810 using Crappie.com Fishing mobile app
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
I may have misled you on the pot. I believe your model may have a speed selector. BUT, the speed switch might not be working properly. Clean it good. Sorry, I have a v2 model. Does your tm have autopilot? I am looking at the parts drawings.
The older control board looks like a pwm board though.
I n ever seen one like yours in person, but I kinda know how they work.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com 3K Star General
* Crappie.com Supporter
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
DOES the speed control slide or does it click when changing speeds?
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
Crappie.com 3K Star General
* Crappie.com Supporter
Crappie.com 3K Star General
* Crappie.com Supporter
Life happened and I ain't opened the pedal yet
Sent from my E6810 using Crappie.com Fishing mobile app
Crappie.com 2011 Man of the Year
* Crappie.com Supporter
OK. It is a pwm system then. Do you have an ohmeter? If so, when you open the foort pedal, I will tell you how to check it.
The potentiometer is a etched on carbon resistor. 1k. It uses magnets in the slider assy to make contact to the carbon.
Let me know. I can get on the phone with you, just remember I don't hear very well.
Member BS Pro-Staff and Billbob Pro-Staff
Proud Member of Team Geezer... authorized by: billbob and "G"
