Yes,That's exactly how we fish..Catch em with livescope..
Sent from my SM-J337A using Crappie.com Fishing mobile app
Would it be possible to use the Panoptix 22 transducer that I have and add the livescope transducer and switch to the 22 for distance and then use livescope to move in and fish? can both be used on one 93sv?
Last edited by crm; 03-18-2020 at 11:24 PM.
jackie53 LIKED above post
Yes,That's exactly how we fish..Catch em with livescope..
Sent from my SM-J337A using Crappie.com Fishing mobile app
John 3:16
Blessed to have as many friends as fingers on your hand is a blessing!!!
"Gone fish'n not wish'n"
In God We Trust.
Can God trust us.
I thought it had to be a 93SV+ to work with Livescope.
Yes and no.Would it be possible to use the Panoptix 22 transducer that I have and add the livescope transducer and switch to the 22 for distance and then use livescope to move in and fish? can both be used on one 93sv?
You can switch on one unit, but each time you would need to wait for the for the new transducer to boot up. There is only one ethernet type connection port on the 93 models, so only one unit at a time.
The LScope needs a PLUS model and the PS22 can use a Plus or Chirp model.
The picture below shows LScope and 93+ on top, PS21 and Chirp unit below it.
The PS22 is the same width as the Lscope(20 degree wide) but he PS21 is 45 degree wide and that what I use as a long distance search mode when the fish move.
The picture shows both graph units set for the same distance scale, but I did that for an example screenshot.
Normally have the bottom unit set at 75-100 feet distance scale and the Lscope distance scale set at 35-50 feet.
crm thanked you for this post