Thread: Help on 2019 Tracker wiring

Trying to get this boat setup. Currently I have a 93sv striker at the console and a 73 echo map at the bow. Just ordered the echo 93 from cabelas so I can use it with live scope sometime in the future. But for now just going to put the transducer on a pole. The tracker came with empty power wires in the bow which I used for the 73. Is this wire strong enough to hook the 93 to also or can I hook it to the bow navigation light. I’m going to put a dedicated lithium battery in the battery storage box and power all 3 units off this. I just don’t want to route new wires from the bow to the rear. Thanks


Sent from my iPhone using Crappie.com Fishing mobile app

I’d go ahead and run 10 gauge wire from the batteries to a separate Blue Seas fuse block. The Livescope module is power hungry and some have had problems due to insufficient voltage to the module and graphs.

I just installed a Garmin 106 Ultra and a Livescope module and I put the fuse block and the module in the starboard storage locker. I’m powering my bow graphs and the Livescope from the new fuse block.