360 not working

**BobB** · 04-12-2019, 08:47 PM

Did a little more looking, and the original Ethernet switch was the AS ETH 5PS. The new AS ETH 5PXG was introduced some time in 2014 around the time the Onix was introduced to support the increased data on the network. A lot of people had intermittent problems with the new stuff and the old 5 port switch after that.
According to Humminbird Greg at the time the new switch has better capability handling multicast subscriptions ...

Rickie does a great support job, but sure miss Greg on the forums.

**Gobob** · 04-12-2019, 09:41 PM

Got it. What a pain in the rear. Had to run 360 to a battery by itself Worked so so then froze. Updated software powered up gave it 2-5 minutes everything works I did find a bad connection on the 360 power cord. Fixed that first. Water trials tomorrow.

Sent from my iPhone using Crappie.com Fishing mobile app

**Gobob** · 04-13-2019, 12:59 AM

Well that was short lived worked 45 minutes. Shut down restarted not working. Fed the Heck up Sick pee owed Not happy I’m pretty sure 360 is the problem. Even when it doesn’t work I can still mark and it goes to all 3 units. 360 is rotating but no movement on the screens. UGH

Sent from my iPhone using Crappie.com Fishing mobile app

**Gobob** · 04-13-2019, 01:00 AM

Rickie chime in

Sent from my iPhone using Crappie.com Fishing mobile app

**Lloakley930** · 04-13-2019, 03:28 AM

Does the Ethernet hub take a software update? I don’t know, just asking

**rnvinc** · 04-13-2019, 06:46 AM

Remove 1 unit from the Network and test ...

(Still need the newer AS ETH 5XPG but I'm not sure it's the problem) ...

Also try manually shutting off the Sonar on all units and test 360 ...

Rickie

**Gobob** · 04-13-2019, 08:24 AM

I’ve removed everything from the network but 1 unit and the 360. Same no spin on screen .360 power on a battery all by itself. The frustrating part is 1 out 4 times I power up , and wait like 5 + minutes before I turn on ping it will work. Shows up on all 3 units Ran it for 45 minutes to be sure it didn’t drop out Turned off hour later started it all back up no rotation. Really aggravating

Sent from my iPhone using Crappie.com Fishing mobile app

**Gobob** · 04-13-2019, 08:25 AM

Oh and I have the sonar off on all the units. Don’t like to hear tick tick tick

Sent from my iPhone using Crappie.com Fishing mobile app

**Gobob** · 04-13-2019, 08:31 AM

After breakfast going to get the newer AS ETH 5XPG

Sent from my iPhone using Crappie.com Fishing mobile app

**Gobob** · 04-13-2019, 11:14 AM

Ok so same box I have only newer Fired up and ran successfully 3 times in a row.
Calling that good for now but will feel better after a few trips to the lake. Thanks guys

Sent from my iPhone using Crappie.com Fishing mobile app

Thread: 360 not working

Thread Tools

Display

Tags for this Thread

Posting Permissions