HaHa HaHa:  0
Page 5 of 6 FirstFirst ... 23456 LastLast
Results 41 to 50 of 51

Thread: Xi5Motorguide nothing but TROUBLE!!!

  1. #41
    Join Date
    Aug 2015
    Location
    MISSISSIPPI
    Posts
    138
    Post Thanks / Like

    Default


    Quote Originally Posted by Stainless View Post
    Have you updated your system software on your Gen 3? The newest version is 18.2. I remember the tech telling me that there was an issue with a version of software that Lowrance was running. Mine are all up to date.
    Software
    Yes I connected to wifi and put memory card in and download it

    Sent from my SM-N950U using Crappie.com Fishing mobile app

  2. #42
    Join Date
    Feb 2018
    Location
    Fort Smith, AR
    Posts
    241
    Post Thanks / Like

    Default

    Have you tried unhooking it from the network and just using the remote to see if it ramps up and down like you stated above? You could at least eliminate the lowrance units as the problem.


    Sent from my iPhone using Tapatalk

  3. #43
    Join Date
    Aug 2015
    Location
    MISSISSIPPI
    Posts
    138
    Post Thanks / Like

    Default

    Quote Originally Posted by Stainless View Post
    Have you tried unhooking it from the network and just using the remote to see if it ramps up and down like you stated above? You could at least eliminate the lowrance units as the problem.


    Sent from my iPhone using Tapatalk
    Yes have tired that also

    Sent from my SM-N950U using Crappie.com Fishing mobile app

  4. #44
    Join Date
    Feb 2018
    Location
    Fort Smith, AR
    Posts
    241
    Post Thanks / Like

    Default

    I do just want to clarify that I have no affiliation with Motorguide. I'm just trying to help out a fellow fisherman.

    Well.. the last thing I can think of is this. Do you know which heading lock mode you have yours in? Course mode or compass mode? The reason I ask is that if you have it running in Course Mode, the Xi5 is going to do everything it can to keep you on a straight line path between point A to point B. So if wind or current is blowing your boat left or right off of this course, it's going to do everything in its power to stay on those preset GPS points. Your boat could be facing into the wind but still, be pulling you left or right depending on where your point B is located.

    The compass mode just goes from Point A to Point B. It doesn't matter if it blows you 100 yards off course, it just heads towards that Point B. So you could get more of a circular pattern while in this mode. The reason I bring this up is because if you are setup in Course mode, it could potentially work that motor a lot harder trying to stay on that line.

    Some examples of this below. I hope you get it figured out. There isn't much worse than spending that kind of money for something that doesn't function correctly as advertised. I'm sure the techs have asked you for your serial and confirmed that this isn't one of the older models of their unit that needed some sort of firmware update with a dongle. I thought that was my problem but with mine being newer, the serial number showed that mine was good. Although I didn't believe them since I was having the problem, the Lowrance settings clearing and recalibrating of my Xi5 fixed my problem.

    Name:  compass mode.jpg
Views: 557
Size:  101.0 KBName:  Course Mode.jpg
Views: 575
Size:  96.8 KB

  5. #45
    Join Date
    Aug 2015
    Location
    MISSISSIPPI
    Posts
    138
    Post Thanks / Like

    Default

    Quote Originally Posted by Stainless View Post
    I do just want to clarify that I have no affiliation with Motorguide. I'm just trying to help out a fellow fisherman.

    Well.. the last thing I can think of is this. Do you know which heading lock mode you have yours in? Course mode or compass mode? The reason I ask is that if you have it running in Course Mode, the Xi5 is going to do everything it can to keep you on a straight line path between point A to point B. So if wind or current is blowing your boat left or right off of this course, it's going to do everything in its power to stay on those preset GPS points. Your boat could be facing into the wind but still, be pulling you left or right depending on where your point B is located.

    The compass mode just goes from Point A to Point B. It doesn't matter if it blows you 100 yards off course, it just heads towards that Point B. So you could get more of a circular pattern while in this mode. The reason I bring this up is because if you are setup in Course mode, it could potentially work that motor a lot harder trying to stay on that line.

    Some examples of this below. I hope you get it figured out. There isn't much worse than spending that kind of money for something that doesn't function correctly as advertised. I'm sure the techs have asked you for your serial and confirmed that this isn't one of the older models of their unit that needed some sort of firmware update with a dongle. I thought that was my problem but with mine being newer, the serial number showed that mine was good. Although I didn't believe them since I was having the problem, the Lowrance settings clearing and recalibrating of my Xi5 fixed my problem.

    Name:  compass mode.jpg
Views: 557
Size:  101.0 KBName:  Course Mode.jpg
Views: 575
Size:  96.8 KB
    What ever it was set from factory, it does it when there is no wind or with wind, I have talking to motorguide since July and back and forth to there authorized dealer several time. It's still under warranty too.

    Sent from my SM-N950U using Crappie.com Fishing mobile app

  6. #46
    Join Date
    Aug 2015
    Location
    MISSISSIPPI
    Posts
    138
    Post Thanks / Like

    Default

    Quote Originally Posted by Stainless View Post
    I do just want to clarify that I have no affiliation with Motorguide. I'm just trying to help out a fellow fisherman.

    Well.. the last thing I can think of is this. Do you know which heading lock mode you have yours in? Course mode or compass mode? The reason I ask is that if you have it running in Course Mode, the Xi5 is going to do everything it can to keep you on a straight line path between point A to point B. So if wind or current is blowing your boat left or right off of this course, it's going to do everything in its power to stay on those preset GPS points. Your boat could be facing into the wind but still, be pulling you left or right depending on where your point B is located.

    The compass mode just goes from Point A to Point B. It doesn't matter if it blows you 100 yards off course, it just heads towards that Point B. So you could get more of a circular pattern while in this mode. The reason I bring this up is because if you are setup in Course mode, it could potentially work that motor a lot harder trying to stay on that line.

    Some examples of this below. I hope you get it figured out. There isn't much worse than spending that kind of money for something that doesn't function correctly as advertised. I'm sure the techs have asked you for your serial and confirmed that this isn't one of the older models of their unit that needed some sort of firmware update with a dongle. I thought that was my problem but with mine being newer, the serial number showed that mine was good. Although I didn't believe them since I was having the problem, the Lowrance settings clearing and recalibrating of my Xi5 fixed my problem.

    Name:  compass mode.jpg
Views: 557
Size:  101.0 KBName:  Course Mode.jpg
Views: 575
Size:  96.8 KB
    Is this the latest update?Name:  20181008_211039.jpg
Views: 544
Size:  32.2 KB

    Sent from my SM-N950U using Crappie.com Fishing mobile app

  7. #47
    Join Date
    Feb 2018
    Location
    Fort Smith, AR
    Posts
    241
    Post Thanks / Like

    Default

    Quote Originally Posted by gaint_71 View Post
    Is this the latest update?Name:  20181008_211039.jpg
Views: 544
Size:  32.2 KB

    Sent from my SM-N950U using Crappie.com Fishing mobile app
    18.2. Looks correct.


    Sent from my iPhone using Tapatalk

  8. #48
    Join Date
    Feb 2013
    Location
    Ohio
    Posts
    523
    Post Thanks / Like

    Default

    How do you change from course mode to compass mode?
    Likes gaint_71 LIKED above post

  9. #49
    Join Date
    Feb 2018
    Location
    Fort Smith, AR
    Posts
    241
    Post Thanks / Like

    Default

    Quote Originally Posted by ksnouf View Post
    How do you change from course mode to compass mode?
    https://www.crappie.com/crappie/fish...ml#post3708464
    Likes gaint_71 LIKED above post

  10. #50
    Join Date
    Feb 2007
    Location
    GA
    Posts
    47
    Post Thanks / Like

    Default

    Good Luck with your Xi5 motorguide!! I wasted a whole fishing season last year going back an forth to repair shop. It still will not work on cruise control. I just do without but wouldn't buy another motorguide motor in the future.
    Likes gaint_71 LIKED above post

Page 5 of 6 FirstFirst ... 23456 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP