After you paint the mold does it make it stronger and how do you clamp them together for shooting
Yes, you can get high temp engine paint at most if not all auto supply stores Snake River. I got this one at an Advanced Auto store...but they all carry engine paint. Thank you for asking. Eric.
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
After you paint the mold does it make it stronger and how do you clamp them together for shooting
Snake River, yes the paint should add strength to the plaster. After a mishap with a previous mold, I’m going to place a thin piece of plywood on the back side of the mold to spread any clamping force out more. Also the use of spring clamps like super oversized clothes pin type clamps to clamp it. I had tried to use a small bar clamp with a screw type handle for pressure which didn’t end well for the mold. Even though I only put an extremely light amount of pressure one side broke into three pieces. Now mind you it was clamp straight onto the mold. So now I’m going to use a couple small pieces of wood. Hopefully in the morning, giving the paint a good amount of time to completely dry...
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumphshipahoy41 LIKED above post
Have you ever thought about using car body gumbo For making molds. used to use the gumbo for Glassing in rifles
www.bobsjigs.com
Are you talking about Bondo, or fiberglass resin? Not sure what auto body gumbo is. Can you explain?
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
I think he means bondo
I have spent most my life fishing........the rest I wasted.
PROUD MEMBER OF TEAM GEEZER
PICO Lures Field Rep
I have heard of using it, as well as the resin from the auto store for cars, but personally, no as it’s a bit more costly...
Sent from my iPad using Crappie.com Fishing mobile app
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph
I just checked the mold and it is dry so I will do a test run in the morning and see how it shoots...Eric, AKA Jamesdean
Sent from my iPad using Crappie.com Fishing mobile app
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph"G", shipahoy41 LIKED above post
Well, didn't come out to well, nor as well as I would have liked. But it's fixable I think. Will work on it some more and go from there...more in a bit...Eric.
Sent from my SM-G892A using Crappie.com Fishing mobile app
Proud to have served with and supported the Units I was in: 1st IDF, 9th INF, 558th USAAG (Greece), 7th Transportation Brigade, 6th MEDSOM (Korea), III Corp, 8th IDF, 3rd Armor Div.
1980 Ebbtide Dyna-Trak 160 Evinrude 65 Triumph