SLABSAUCE Fish Attractant |
Likes Likes:  0
Thanks Thanks:  0
Results 1 to 3 of 3

Thread: Seat Base Installation Question?

  1. #1
    Join Date
    Apr 2017
    Location
    TN
    Posts
    299
    Post Thanks / Like

    Default Seat Base Installation Question?

    I am about to install a new seat base for a Millenium seat mounted on a pedestal. This will be the driver seat in a tiller operated Lund. The floor has carpet over a 3/4" plywood floor. What is the most secure method of attaching a 9" base that fits flat on the floor without a center hole. Originally the seat sat on a storage box attached to a side box area filled with floatation. I removed the storage box to allow more room in the stern for gas and battery.
    Thanks

  2. #2
    Cray's Avatar
    Cray is online now Crappie.com Legend and Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    15,787
    Post Thanks / Like

    Default

    What kind of base and what size post. If it’s one of those pipe type around 2 1/2 inches n diameter, I would find a piece of 3/4 plywood, cover with similar carpet mount base to it with counter sunk bolts and flat washers. Then I would mount that to your floor. Make it big enough you can put plenty of large screws in it to spread the load across the floor.
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979




  3. #3
    Join Date
    Mar 2006
    Location
    West Tennessee
    Posts
    1,108
    Post Thanks / Like

    Default

    If you can find one of the cross members Id try to screw into that as well.


    Sent from my iPhone using Tapatalk

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP