Thanks Thanks:  0
HaHa HaHa:  0
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Trolling motor batteries

  1. #11
    Join Date
    Mar 2013
    Location
    Pa
    Posts
    622
    Post Thanks / Like

    Default


    Quote Originally Posted by Cray View Post
    Depends on what charger you have. Most modern chargers will have a setting like 2-10 and boost. You would want to run it on 10, as it charges the amps will drop off and eventually be just a trickle. And some will actually shut off at end of charge. So first thing is figure out what charger you have and how it operates. Most of us today run a onboard charger that is fully automatic. I also was in the truck leasing business for 31 years. So I understand what you did back in the day. That’s just not feasible or nessecary in your situation. Best investment you can make is a cheap multimeter if you don’t have one. Put battery on charge and let it charge up, then remove charger and let sit for about 30 minutes. Check voltage with meter. It should read in the 13.7 13.9 range when fully charged and can drop on down to 13.5 after a period of time.
    I have 3 or 4 chargers. The newest one (perhaps 20 yrs.old) is 10 amp and it does cut back amps as battery charges. However I do not have a small maintainer type.Walmart has several styles. Yes I have a multi meter as well as a old military volt meter so I should be able to maintain a good environment for the battery. Some may think I am just cheap but I may only use this a few times each year. I am reducing my work load so hope to put more time on the water.

  2. #12
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,388
    Post Thanks / Like

    Default

    Quote Originally Posted by addictedangler View Post
    I have 3 or 4 chargers. The newest one (perhaps 20 yrs.old) is 10 amp and it does cut back amps as battery charges. However I do not have a small maintainer type.Walmart has several styles. Yes I have a multi meter as well as a old military volt meter so I should be able to maintain a good environment for the battery. Some may think I am just cheap but I may only use this a few times each year. I am reducing my work load so hope to put more time on the water.
    The old 10 amp is what I would use then. As long as you remember to keep an eye on it. With your experience you shouldn’t have a problem.
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979



    Likes "G" LIKED above post

  3. #13
    Join Date
    Jul 2017
    Location
    MO
    Posts
    980
    Post Thanks / Like

    Default

    Quote Originally Posted by addictedangler View Post
    I am very great full for the information. Our Walmart did not have a battery for my 2014 buick a few weeks ago. I went to tractor supply and they did not have one either. Then to Autozone and it was around $170.00 for the top of the line battery. That was the only one they had and this is not a very high amp battery.
    I assume there is a difference in a marine battery,trolling motor battery. Also what about the ones they say are for golf carts and so on? Yesterday I went to Wallmart for a few items. One was generic Excedrin. They were out. The lady next to me had the same problem with her on the shelf med. needs. She said look at the shelf! They were about 1/4 empty. What is going on?
    Golf cart batteries are 6v, but are deep cycle. Marine/deep cycle batteries are designed to be discharged and recharged regularly. If you do that to a standard battery, it will fail quickly. They also have a thicker case to take more abuse.

    Quote Originally Posted by addictedangler View Post
    I have a few more questions:
    1. I assume after I use my motor I should charge it with a regular charger to achieve full charge for the next day?
    2. At what rate of charge ( size of charger) for this size battery? Example would be a 10 amp overnight.

    I used to be in charge of our Delco battery warranty for our trucking company 20 years ago. We used to check electrolytic levels clean battery and terminals then charge at a low rate for a few days. To test we removed the surface charge then tested for warranty. I assume this is still how it is done?
    Anywhere from 2-10 amps would be plenty. More amperage means a faster charge.

    You should put it on the charger as soon as you get home. Letting them sit while discharged is one of the worst things that you can do.

  4. #14
    Join Date
    Nov 2016
    Location
    Missouri
    Posts
    537
    Post Thanks / Like

    Default

    I have two Ph12350 Group U1 batteries 35ah that I like. They weigh 23 pounds each which makes them comfortable to carry. I picked them because their small size means they can be comfortably placed between my legs in a kayak. They probably cost me a little more, maybe $20, than a single battery. The thing is that I spend more than $20 on gas and food every time I go fishing. These batteries are typically used in wheelchairs if you were curious. That means they normally get abused by being run to low. The guy at the battery story says his wheelchair customers use these batteries every day and typically run them down to under 20 percent and they still last a year.

    People look at the battery thing wrong. They are not an investment but an expendable item like fuel. I can understand that if you have a boat with two $160 batteries to run a 24 volt trolling motor and it's a hassle to replace them that you may not think of them as expendable. Batteries for a kayak or a canoe is completely different because you are taking them out of the boat every time you fish and there is no reason to spend $320. I fish all day on one 35ah battery and the second is a reserve. Of course I have a 12lb thrust trolling motor so a 30 will use more power.

    What I get with two small batteries is ease of transport, small size that fits anywhere, the option of lugging one 23lb battery if I'm not going to fish long, $60 dollar replacement cost if one goes bad, a spare if one wasn't charged properly or was damaged, SLA security against leaks, quick recharge with two chargers, and relatively low overall weight.

    As I said earlier I think of batteries the same way I would fuel. The guy that sold them to me said he expected them to last 3 years. I got them on a good sale for $50 each. If I use them 10 times a year for 3 years that is thirty uses. That works out to be $3.33 dollars a trip. I spend more than that on lost lures. If you go more often than 10 times a year then you will want to take good care of them which mostly means not running them down below 50 percent charge and recharging them as soon as possible. My situation is a little different because since I don't use them a lot I don't care if I go below 50 percent and shorten their life. Batteries have a shelf life regardless of how many times you cycle them so the guy at the battery store told me to not worry too much about damaging them. I know some people on here will tell you they have used there batteries for a lot more than three years but they probably paid more for them and they are probably heavy as hell. Let's say you double their life by 3 years and they last 6 years. That means cost for 30 uses is $1.66, does anyone who fishes really care about an extra $1.66 a trip? I would rather replace them than use a heavier more expensive and less convenient battery for the small additional cost.

    I would like to get Lithium batteries but for 70ah the cost would be $900 dollars and because you can run them down to 0 it would be the equivalent of 140ah battery but there is no way to justify the cost. I see where you can get them from China for less than $300 but with a minimum order of 10. If you used them everyday that would actually be a good deal because you can recharge a Lithium battery 2000 times. That could be something to look into if a couple of us wanted to get together and order them but I'm leery of all things Chinese.

Page 2 of 2 FirstFirst 12

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP