Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Spider rigging

  1. #1
    Join Date
    Mar 2011
    Location
    Lake Park, Ga.
    Posts
    462
    Post Thanks / Like

    Default Spider rigging


    I just got a new boat and rigged it for long-line or spider rigging. I have been long-line trolling jigs for a couple years but never tried spider rigging. I need some tips of weight size, speed, and any other tips will be greatly appreciated.

  2. #2
    Join Date
    Mar 2015
    Location
    Bartlett, TN
    Posts
    7,352
    Post Thanks / Like

    Default

    I like 3/4 to 1oz weights, 8# line and 12' rods. I try to keep my speed under .4mph, unless I am pushing jigs or minnows fast- .8-1mph. I mark my rods every 4' to help with depth control. I lay off the troll motor as much as possible. During the fall/winter, I use corks to help with the light bite. I do prefer to long line most of the year. I put weight and cork on main line and use a 2 jig setup on a leader. 2.5' long, 8#. I start out with different colors to see which becomes the hot color or colors. I don't use minnows, myself. Jigs with Crappie nibbles for me. Just remember- some days they like it fast and some says slow. I hope this helps.
    Likes dmac LIKED above post

  3. #3
    Join Date
    Mar 2011
    Location
    Lake Park, Ga.
    Posts
    462
    Post Thanks / Like

    Default

    Yes it does. I'm going to try it in a few week to see how it works. Is the egg sinkers the best 3/4 oz weight?

  4. #4
    Join Date
    Mar 2015
    Location
    Bartlett, TN
    Posts
    7,352
    Post Thanks / Like

    Default

    Yes on the egg sinkers. I use 3/4oz mostly. they or fine.

  5. #5
    Join Date
    Nov 2014
    Location
    mississippi
    Posts
    957
    Post Thanks / Like

    Default

    Quote Originally Posted by drucker View Post
    I just got a new boat and rigged it for long-line or spider rigging. I have been long-line trolling jigs for a couple years but never tried spider rigging. I need some tips of weight size, speed, and any other tips will be greatly appreciated.
    the faster you go the more weight you'll need. when i'm truly spider rigging im not doing much more and just drifting. ill go sometimes as light as 1/4 but most of the time its 3/8. 1/2 ounce if its windy. if im going to push jigs i'll go as high as one ounce. a general rule of thumb i use is to keep my line going straight down. adjust weight accordingly to match speed and depth.
    Likes trypman1 LIKED above post

  6. #6
    sinkermaker is offline Crappie.com Legend * Crappie.com Supporter
    Join Date
    Feb 2011
    Location
    Lake Murray SC
    Posts
    6,125
    Post Thanks / Like

    Default

    Weight size is dependent on speed. True spider rigging is below .5 mph. Pushing is usually considered anything faster. You want your lines to hang straight down or no more than 10 to 15 degrees back. 1/2 or 3/4 is good for normal spider rigging.

  7. #7
    Join Date
    Mar 2011
    Location
    Lake Park, Ga.
    Posts
    462
    Post Thanks / Like

    Default

    I think I got it. Is it better to spider rig in the fall/winter since they are deeper and tighter to structure?

  8. #8
    Join Date
    Feb 2011
    Location
    North carolina
    Posts
    88
    Post Thanks / Like

    Default

    O
    Quote Originally Posted by sinkermaker View Post
    Weight size is dependent on speed. True spider rigging is below .5 mph. Pushing is usually considered anything faster. You want your lines to hang straight down or no more than 10 to 15 degrees back. 1/2 or 3/4 is good for normal spider rigging.
    Thanks look like a place ou wallop[A loop k Name:  Ajith%20Kumar_The%20Yacht_ZkFmR2Vf.jpg
Views: 1252
Size:  24.2 KBTTACH]281337[/ATTACH] up pop in on to I'll i

    Sent from my XT1585 using Crappie.com Fishing mobile app
    Attached Images Attached Images  

  9. #9
    Cray's Avatar
    Cray is offline Crappie.com 2019 Man of Year, Supermod & Moderator of the Mechanics Forum * Crappie.com Supporter
    Join Date
    Oct 2010
    Location
    Byhalia,Mississippi
    Posts
    17,388
    Post Thanks / Like

    Default

    Check YouTube for videos of Ed Dukes of southern crappie rods on tight lining for crappie. Some very informative videos.
    Proud Member of Team Geezer
    Charlie Weaver USN/ENC 1965-1979



    Likes Erin Brewer LIKED above post

  10. #10
    Join Date
    Mar 2011
    Location
    Lake Park, Ga.
    Posts
    462
    Post Thanks / Like

    Default

    Will do.

Page 1 of 2 12 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP