SLABSAUCE Crappie Attractant |
Thanks Thanks:  0
Results 1 to 8 of 8

Thread: Need a little Info

  1. #1
    Join Date
    Mar 2011
    Location
    Fordyce, Arkansas
    Posts
    71
    Post Thanks / Like

    Default Need a little Info

    I bought rod holders from a fellow on here that makes them but forgive me I have forgotten his name and lost the phone number too. What I need is to order some more of those elastic ties that keep the rods held in place! Thanks for your help.

  2. #2
    Join Date
    Jan 2005
    Location
    Plainview, / Russellville , Arkansas
    Posts
    15,623
    Post Thanks / Like

    Default

    Could it be Wayne Stewart , goes by Creekslick ?
    Moderator of Beginners n Mentoring forum
    Southern Pro Tackle / Timmy Tom Jigs
    Power Crappie / Todd Huckabee Rods
    Likes RKW LIKED above post

  3. #3
    Join Date
    Mar 2011
    Location
    Fordyce, Arkansas
    Posts
    71
    Post Thanks / Like

    Default

    Quote Originally Posted by NIMROD View Post
    Could it be Wayne Stewart , goes by Creekslick ?
    Yes Sir that's exactly who I need to contact!

  4. #4
    Join Date
    Mar 2011
    Location
    Fordyce, Arkansas
    Posts
    71
    Post Thanks / Like

    Default

    Thanks again Nimrod, I sent Creekslick a PM.

  5. #5
    Join Date
    May 2010
    Location
    NE Arkansas
    Posts
    5,041
    Post Thanks / Like

    Default

    You can buy those at most walmarts
    Quote Originally Posted by RKW View Post
    Thanks again Nimrod, I sent Creekslick a PM.

  6. #6
    Join Date
    Jul 2013
    Location
    Batesville, AR
    Posts
    2,528
    Post Thanks / Like

    Default

    Quote Originally Posted by RKW View Post
    I bought rod holders from a fellow on here that makes them but forgive me I have forgotten his name and lost the phone number too. What I need is to order some more of those elastic ties that keep the rods held in place! Thanks for your help.
    I have the same ones that Wayne built. And he told me to just get them from Walmart. Seems like I had to cut the knots off of the new ones thread them through the holes in the holders put the knob back on re-tie the knots and you're good to go for a while.


    Bobby McGaha
    3250 Harrison St. Ste. 300
    Batesville, AR 72501
    870-612-5300

    Securities offered through First Allied Securities, Inc., A Registered Broker/Dealer. Member FINRA/SIPC. Advisory services offered through First Allied Advisory Services, Inc. A Registered Investment Adviser.
    Likes RKW LIKED above post

  7. #7
    Join Date
    May 2010
    Location
    NE Arkansas
    Posts
    5,041
    Post Thanks / Like

    Default

    Just google ball bungee cords. I had to cut the ball off, install and tie the ball back on, but you will have to do that anyway.
    Likes RKW LIKED above post

  8. #8
    Join Date
    Mar 2011
    Location
    Fordyce, Arkansas
    Posts
    71
    Post Thanks / Like

    Default

    Quote Originally Posted by Mac Daddy View Post
    I have the same ones that Wayne built. And he told me to just get them from Walmart. Seems like I had to cut the knots off of the new ones thread them through the holes in the holders put the knob back on re-tie the knots and you're good to go for a while.
    Thanks Mac Daddy, I went out to look at mine to see what length I needed. They are dried and stretched a bit being 4 years old but it looks like I need 12" ball bungees.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP