Looking very good! That will fly!
Tried mounting on t/m, did not like turning motor to see direction.Mounted beside seat using large Ram mount,2ft. of 1 1/4 pvc, 3.1/2 ft. 1 in inside of 1.1/4 with nipple glued 8 inch above top 1.1/4 to keep from sliding down. drilled holes through inside pipe to set depth, and glue elbow to top to point direction. some have made fun of it, but all I bought was the 2 clamps to tie pvc to Ram mount. loosen mount, turn leg up and hauls above top rail. to move from pile to pile, pull pin slide up and re pin. hope someone can use this.
Looking very good! That will fly!
Looks great. May have some questions when I get mine.
Life is not measured by the breaths we take, but by the moments that take our breath away.
Looks very good. Nice set up for sure.
Bobby McGaha
3250 Harrison St. Ste. 300
Batesville, AR 72501
870-612-5300
Securities offered through First Allied Securities, Inc., A Registered Broker/Dealer. Member FINRA/SIPC. Advisory services offered through First Allied Advisory Services, Inc. A Registered Investment Adviser.
I really like it
Nothing wrong with that setup....great innovation.