Is this any help?
Foley Marine & Industrial Engines
Hi guys.
I have this old Wisconsin single cylinder engine I need parts for. Do any of you fine people know of a good outlet for parts? I checked within 100 miles of my place to no avail. I also tried a couple of INTERNET sites without much luck.
I'll give the mod and spec numbers just for the heck of it and what I need is points, condenser and a carb rebuild kit.
Mod.# AKN
Spec.# 85226
Ser.# 2337425 and it has a Wilco magnito.
Thanks,
Mike
Last edited by FisherMike; 02-05-2009 at 11:33 AM.
Mike
Is this any help?
Foley Marine & Industrial Engines
have you tried your local Napa store... ill bet they can help..
points are # CS2201 condenser # WI200 in the Echlin brand sorry but couldnt find part # for carb kit.... hope this helps
YZ
Last edited by yzcajunman; 02-10-2009 at 12:59 PM. Reason: to add part #'s
If ya catch a biggun' release her so I can catch her too!
Last edited by FisherMike; 02-07-2009 at 06:50 PM.
Mike
Mike I added a CS in front of the 2201 for the points apparently i had left it off when i added the part #'s.... these are the correct parts for you engine more info on the carb ie..carb number may help more....
YZ
Last edited by yzcajunman; 02-10-2009 at 01:12 PM.
If ya catch a biggun' release her so I can catch her too!
Thank yz for the help.
I still hadn't herd back from a couple of parts distributers. That's what I was waiting for. I kind of want to get all the parts from the same place if possible. I'm also going to need a head gasket.
I'll pull the carb tomorror and look for numbers. I can't see any with the carb installed.
Thanks again.
Cityboy thank you also. If I can't find them, I'll try the grumpy ole man.:D
Mike
YZ, I pulled the carb off this morning and tore it down. There was not a single number inside or out, it just says Zenith carb on it. Possibly it had a tag on it when it was newer.
I've at least narrowed down all the parts I need.
Carb kit
Carb float
Carb base gasket
Head gasket
Points and condenser
Mike