Likes Likes:  0
Thanks Thanks:  0
HaHa HaHa:  0
Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: Water/Seperator Install

  1. #1
    Join Date
    Oct 2006
    Location
    Indian Rocks Beach, Florida, United States
    Posts
    1,185
    Post Thanks / Like

    Default Water/Seperator Install


    Would some of you mind sharing by way of pics your installation of a water/separator? Just trying to get some ideas. Thanks
    You can't finish what you don't start

  2. #2
    Scrapper's Avatar
    Scrapper is offline Crappie Wall Hanger II - Moderator Mechanics forum
    Join Date
    Sep 2008
    Location
    Nashville AR
    Posts
    1,555
    Post Thanks / Like

    Default

    Mine on my Ranger is mounted on one of transom braces. I have seen most the bilige of boats. They are not real hard to install. I would just make sure it will be pretty easy to get to for replacement, and I would put it near a place you will be putting things in and out so it doesn't get hit by something. There are a couple of trackers on page 1 or 2 maybe 3 by now on the main forum with some good pics of their seperators. Check them out...sorry I don't have any pics. If you have any questions please ask. What kind of boat is it going on??
    "But if serving the Lord seems undesirable to you, then choose for yourselves this day whom you will serve, whether the gods your ancestors served beyond the Euphrates, or the gods of the Amorites, in whose land you are living. But as for me and my household, we will serve the Lord.” Joshua 25:15

  3. #3
    Join Date
    Oct 2006
    Location
    Indian Rocks Beach, Florida, United States
    Posts
    1,185
    Post Thanks / Like

    Default

    Thanks for the reply! Going on a Tracker 185. The easy to get to part is the problem. They sure pack everything in these Trackers not leaving much room to mount anything additional!
    You can't finish what you don't start

  4. #4
    Join Date
    Dec 2005
    Location
    East Tennessee
    Posts
    2,627
    Post Thanks / Like

    Default

    heres mine, quick and easy install


  5. #5
    Join Date
    May 2004
    Location
    Gloucester, VA
    Posts
    6,080
    Post Thanks / Like

    Default







    It is crowded below deck so I installed the separator in the splash well where it is easy to get to.
    Keith
    2008 NWR Bash Crappie Champion
    2010 NWR Bash Yellow Perch Champion
    2010 Buggs Bash Smallest Crappie Award

  6. #6
    Join Date
    Oct 2006
    Location
    Indian Rocks Beach, Florida, United States
    Posts
    1,185
    Post Thanks / Like

    Default

    That's what I was looking for. ????What are the connectors that I will need to hook this thing up with, and where might I purchase them. Kit came with the mounting bracket and filter.
    You can't finish what you don't start

  7. #7
    Join Date
    Feb 2007
    Location
    Williamston, SC
    Posts
    434
    Post Thanks / Like

    Default

    I used two 3/8 x 3/8 barbed connections
    Midland Metal - Brass Fittings, Valves, Hose Clamps and Accessories for Hose, Pipe and Tube.
    Two brass plugs
    Midland Metal - Brass Fittings, Valves, Hose Clamps and Accessories for Hose, Pipe and Tube.
    Add two small hose clamps, two screws for mounting, and some teflon tape.
    All this can be picked up at the hardware store. Got mine at Ace
    TinBoats.net
    The original aluminum boat fishing club!

  8. #8
    Join Date
    Oct 2006
    Location
    Indian Rocks Beach, Florida, United States
    Posts
    1,185
    Post Thanks / Like

    Default

    All of this is starting to make sense. I really do appreciate the help!!
    Last edited by Downwind; 01-15-2009 at 10:20 AM.
    You can't finish what you don't start

  9. #9
    Join Date
    Oct 2006
    Location
    Indian Rocks Beach, Florida, United States
    Posts
    1,185
    Post Thanks / Like

    Default

    PanMan--Where did you get that mounting piece? Make it? I'm going to have to raise my mount up some.
    You can't finish what you don't start

  10. #10
    Join Date
    May 2004
    Location
    Gloucester, VA
    Posts
    6,080
    Post Thanks / Like

    Default

    Quote Originally Posted by Downwind View Post
    PanMan--Where did you get that mounting piece? Make it? I'm going to have to raise my mount up some.
    The mounting block is a left over piece of starboard (plastic wood) I used when I was mounting the new 997 transducer.
    Keith
    2008 NWR Bash Crappie Champion
    2010 NWR Bash Yellow Perch Champion
    2010 Buggs Bash Smallest Crappie Award

Page 1 of 3 123 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

BACK TO TOP